My Ezbook 3 Pro's display its not working

[sepadry]

Hi guys, I bought Ezbook 3 Pro last mounth, and it was working so good, but 2 days ago when I finished working, I turned it off, and 1 hour again I tried to turn it on and the display stopped working. The screenshowme some pixels but the don’t change the colour, and nothing. I putted some photos, watch it please and help me if someone know What can I do. thanks guys and sorry for my bad english hehe

[sepadry]

[sepadry]

[Liam]

I would recommend performing a hard reset. Make sure the laptop is fully charged then press and hold the power button for 10 – 15 seconds and release. When you power it back on, hold the power button for around 4 seconds.

[sepadry]

Hi Liam I did it, and its not working. Thanks for help, can you recommend me something more?

[joe321]

Strange… Try connecting mini hdmi output to tv, if that works than its probably display fault or connection to a display. The cable that goes to a display seems to be prone to a bit of wear with a lot of closing/opening – open the back and check that…

[JL]

wow another one…this happened to me also, well a different type of display failure.  Ended up returning to GB and getting a full refund.

This is a deal breaker for me from buying another Jumper.

[sepadry]

Thanks all, guys if the problem are in software, what can I do?

[Thomas Z.]

Thats obv Not a Software problem. I guess its the cable to your Display. The cable has a Bad Position and suffer from Opening and closing the notebook. <!–more–>

[juan]

flex cable bad quality

[sepadry]

up

[Author]

Posts