My jezb 3 pro It does not respond to the changes and does not install new win

[bigboybig]

try to reset bios by default setting and try again.

[Alessandro Gioffredi]

Unfortunately I have tried many times to make default settings from bios but without any changes. I feel unlucky, I do not understand why …

This pc works well … and for now I find only difficulty … damn bad luck

[Alessandro Gioffredi]

There are some unknowable news for me. Installation from UEFI usb is not allowed but USB external DVD everything seems to work but always hangs at different percentages. I cleaned everything m.2 even with diskparts and clean commands transforming the partition into GPT but nothing: it starts to install fast then stops … sometimes at 3% others at 29 other still at 43% … now i’m trying to Clone the emmc with HDCLONE and see if it’s part … I keep not understanding. There have never been any such things in 20 years of PC … This morning I also mistakenly erased the partitions of the eMMC and the pc did not start anymore but thanks to a Ghost previously done and the restore function reloaded the image quickly and perfectly It rejects perfectly. But to make a new installation just do not talk about it ….

[bigboybig]

Convert gpt on hard drive during installation

[Alessandro Gioffredi]

Hello bigboybig. I did some discoveries and something has improved. I tried to install win 10 from external dvd and with amazement and doing the same operations, the installation started. But each time it was booming at different rates. Then in the end I downloaded a iso from microsoft and put on usb with their media creator … now win 10 you install to great !! And above all, it never stops. But I still have problems and I would like to ask you for help: I ​​installed win correctly but I can not get all the drives installed properly because the pc that now has win starting at m.2, is very ticking and 20 mins goes freez and locks . In short, always climb … what package did you use? Are there any special curiosities? To have no doubt I ordered a m.2 2280 Crucial x300 from 275Gb not to rule out that it is not good ZTC 128Gb I’m using now. Otherwise I had thought of cloning with clonecd and then erasing emmc …. because it goes freez every few minutes is destructive

[bigboybig]

All Drivers you can download from link below.

https://drive.google.com/drive/folders/0BxulJuGj9f7QZWFWSzNEMVhlV2M

I using this M.2 Sata3 SSD buying at Aliexpress.

 

 

Attachments:

You must be logged in to view attached files.

[bigboybig]

<h1 class=”watch-title-container”><span id=”eow-title” class=”watch-title” dir=”ltr” title=”How to create a UEFI Bootable USB drive with Windows 10 Setup”>How to create a UEFI Bootable USB drive with Windows 10 Setup </span></h1>

 

[bigboybig]

<h1 class=”watch-title-container”><span id=”eow-title” class=”watch-title” dir=”ltr” title=”HOW TO INSTALL WINDOWS 10 WITH UEFI BOOTABLE DEVICE.”>HOW TO INSTALL WINDOWS 10 WITH UEFI BOOTABLE DEVICE</span></h1>

 

[bigboybig]

All missing drivers you can download at this forum.

Ezbook 3 Pro Doubledriver Backup

[Alessandro Gioffredi]

Thank you very much for the delusions: you always learn little more things and different procedures. Everything makes culture. The directors you sent me have already downloaded them from your previous post. My came a week ago, dual band AC version. Are they okay? On the Jumper site I did not find anything … ne driver dump. Less bad I always have the habit of making a ghost clean image before working … When I tried Cloning the eMMC on SSD I used HD Clone Professional 4.3 but I think it’s old … and not suitable for making copies of UEFI …I do not know. Or it does not start because it simultaneously finds two identical copies of WIN 10 … I could try, after cloning, only to clear C: leaving the recovery partitions of the eMMC and see if it starts from SSD. What do you think about it?

[Alessandro Gioffredi]

Bigboybig, i’m crazy !! I do not want to think it’s wrong in some part of it! I hope the SSD is up and the new Crucial MX300 will go better! He does not even install the key made last night with which he had installed well … done all the procedures we went back to where he stops where he wants it. The only good partition and eMMC !!

Attachments:

You must be logged in to view attached files.

[Alessandro Gioffredi]

20 years I install and assemble pc and never absurd things like this … I hope right at this point is m.2 not compatible. I do not know what to think and what to do since even yesterday with the same installation was blocked. I can not even think of Rams not stable because I repeat, with emmc works 100% for hours ….

[bigboybig]

buy this ngff M.2 Sata3 SSd.

https://www.aliexpress.com/item/KingSpec-22-42mm-NGFF-SSD-256GB-SATA-III-6Gb-s-Internal-Solid-State-Drive-NGFF-For/32741153443.html?ws_ab_test=searchweb0_0,searchweb201602_2_10152_10065_10151_10068_10130_10084_10083_10080_10139_10307_10082_10081_10110_10178_10137_10111_10060_10112_10113_10155_10114_10154_10056_10055_10054_10312_10313_10059_10314_10315_100031_10099_10078_10079_10103_10073_10102_10052_10053_10142_10107_10050_10051-10050normal#cfs,searchweb201603_1,ppcSwitch_3&btsid=c0be09e9-8d75-44db-a28b-0e1c91dd374a&algo_expid=1ec9500a-fc73-4d8c-a587-610718a1fc6b-4&algo_pvid=1ec9500a-fc73-4d8c-a587-610718a1fc6b

 

 

[roberto]

I’ve used the same kingspec 256gb without any problems

 

 

[Alessandro Gioffredi]

Hello to all. The problem is solved!! It was the defective SSd m.2! As usual I was just lucky! As soon as the Crucial MX300 came from 275Gb long version all the problems have disappeared. Win 10 has been installed from USB perfectly, the machine is stable even under stress but above all the speeds in writing and reading are great. Thank you all for the support. For Administrators: You can add it to the “Solved” in the title.
P.S. Put photos of the MX 300 long mounted as well as by other users by removing the useless plastic outline. Make the change, it’s very easy!!! and It does not touch

Attachments:

You must be logged in to view attached files.

[Author]

Posts