Need BIOS recovery image \ way BIOS reset

Need BIOS recovery image \ way BIOS reset

TechTablets › Forums › Teclast Forums › Teclast F6 Pro › Need BIOS recovery image \ way BIOS reset

Tagged: 

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 3, 2018 at 7:18 pm #143580
    Mega
    Participant
    • Posts: 3

    Just have killed my notebook by enabling CSM (compatibility support module) in BIOS settings. Screen is full of garbage, have no way to open bios and reset it. Any way to reset it’s bios settings to factory defaults or reflash it? Also BIOS image cannot be found in the internet. I’m very sad. Any support is appreciated

    June 17, 2018 at 12:12 pm #143947
    joegillian
    Participant
    • Posts: 11

    hi
    did you try to remove the battery ?? normaly its reset the bios

    June 17, 2018 at 11:48 pm #143983
    Mega
    Participant
    • Posts: 3

    Update: solution was to completely discharge (not just disconnect!)) battery. Made using usb cables to charge and tablet overnight. BIOS had been reset after that

    September 17, 2021 at 7:18 am #221997
    Blackhat911
    Participant
    • Posts: 12

    Open the back panel of laptop, disconnect the battery connector, leave it for 10-15 mins, then reconnect battery and power on. This should reset the BIOS settings to factory defaults.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar