OSX on Onda v919 Core M

OSX on Onda v919 Core M

TechTablets › Forums › Onda Forums › v919 3G Core M Discussion › OSX on Onda v919 Core M

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 2, 2015 at 3:23 am #14724
    Anonymous
    Inactive
    • Posts: 1

    Hi guys,

    I’m very interested in picking up this device to install Mac OSX on it.

    The graphics are compatible, and the 3G card can be replaced with an apple wifi/BT card, so this device is very promising as a Mac tablet.

    The only remaining question is the touch screen. Some folks over at insanelymac have made a lot of progress writing drivers for i2c hid touch screens, such as in Surface Pro 3 and Dell Venue 11 Core M.

    In order to learn more about whether the drivers in development will work with this device, would one of you mind posting the DSDT of your device? With this DSDT, I can share it with the developer to determine if his drivers will support this touch hardware.

    Thanks in advance. I’m excited about the prospect of OSX running on this device.

    November 2, 2015 at 3:35 am #14725
    kfred
    Participant
    • Posts: 1

    It would be greatly appreciated if someone could post their DSDT. If this device can run OSX I’d buy it in a heartbeat.

    November 4, 2015 at 3:52 pm #14933
    Anonymous
    Inactive
    • Posts: 41
    Anonymous wrote:

    ……3G card can be replaced with an apple wifi/bt…..

    Are you sure you can directly swap out the 3g card with a wifi card?  I tried to do it with a CUBE i7 and the connectors on the board  are not the same.  There are slight differences. I really wish we could though.

    If you know a way of doing please let me know.  It would be very appreciated.

    Dasher

     

     

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar