TechTablets › Forums › Teclast Forums › X98 Plus Discussion › [Problem] Touchscreen problems in w10
Tagged: Teclast X98 plus
- This topic has 6 replies, 4 voices, and was last updated 9 years, 10 months ago by
Giannis Rns.
-
AuthorPosts
-
September 16, 2016 at 6:50 pm #49916
Hi there,
I have a problem on my x98 plus (A5C6) with the touchscreen. It began with the axis inverted so if I clicked on the right side of the screen the system would recognize my touch as if it was made on the left side. Then I found this video https://www.youtube.com/watch?v=Wb2YChNFrxM that apparently fixed this issue. So I tried that but nothing happended. So i read the comments and tried one solution and it sort of worked. After all the changes that I did to the file TouchSetting.gt i restarted the tablet. And after restart I could put my pin code (so i thought it worked) but then if I wanted to go to the documents my touch was reading in the bottom left, like it was with inverted axis. I can, however, open internet explorer, or a paste because the touchscreen, dont jnow why, is working in the middle of the screen ahaha.
Anyone can help me?
Thank you very much.
September 17, 2016 at 8:01 am #49953I had the same problem after clean install so I atached keyboard and just started windows update
September 17, 2016 at 8:59 am #49962I had the same problem after clean install so I atached keyboard and just started windows update
So you are using the tablet without the touchscreen?
September 17, 2016 at 4:36 pm #50018[/quote] So you are using the tablet without the touchscreen? [/quote]
No, I just used keyboard to install windows updates and rebooted.
After reboot touch is working
September 17, 2016 at 6:22 pm #50022The problem is an updated Intel graphics driver which rotates the screen. You can roll back the driver through the device manager.
Alternatively you can open the Intel Graphics Properties by right clicking on the desktop. Go to Options and Support and enable hot keys. Keep pressing ‘<ctrl><alt>Left’ to rotate the screen until everything is the right way up. Windows seems to remember the rotation so this only needs to be done once.
September 17, 2016 at 8:54 pm #50030The problem is an updated Intel graphics driver which rotates the screen. You can roll back the driver through the device manager. Alternatively you can open the Intel Graphics Properties by right clicking on the desktop. Go to Options and Support and enable hot keys. Keep pressing ‘<ctrl><alt>Left’ to rotate the screen until everything is the right way up. Windows seems to remember the rotation so this only needs to be done once.
I just did a w10 restoration but the problem happened again.
Now I can´t go back with the drivers but I am installing an older driver.
I will post results. Thank you both.
EDIT: Seems like that’s the problem. Installed an old driver and it fixed my problem.
For other users having my problem, I went to https://downloadcenter.intel.com/ and downloaded the applicattion to scan for drivers. There is an option there to install an older driver.
Thanks for the help guys!
Cheers
October 2, 2016 at 12:11 pm #52513Hello. I upgraded my X98 plus 3G to windows 10 anniversary update but I have no touch screen ever since! Could anyone help me to restore my touch screen?? I have no idea how to install drivers and where to find them!
-
AuthorPosts
- You must be logged in to reply to this topic.

