Screen orientation and and rotation

[Andrujka]

Hi,

I’ve updated to 1511 build and i have some issues with the screen, it would be great if someone can give me a hand. Thanks!

1. Screen orientation is wrong (180 degrees), basically upside down. If i disable rotation, to have portrait, i must force portrait, flipped. Same for landscape
2. Enabling rotation gives me a 90 degree delay: basically when i put the tablet in landscap mode, the rotation “stays back” like 90 degrees. I have downloaded the latest kionix x64 drivers(1.28.3) and applied the reg from other  threads, but no luck. It’s the exact scenatio described in the txt file that comes with the driver, but have no idea what to do with that info…

The ôChipMountö value in the registry is found in device key HLKM\SYSTEM\CurrentControlSet\Enum\ROOT\SENSOR\0000\kxfusion

If device does not have chip mount info (an ACPI _CDM method), please calibrate with factory_cal or set a ChipMount value in the registry.

If the screen is rotated by 90 degrees and it changes the right way when the device is turned (screen goes counterclockwise when device goes clockwise), use DEVICE_MAP2 if the screen is counterclockwise

[Ment0]

I read about some registry values (01 01 00 etc.) and I read about someone who contacted the Kionix people directly and they helped him out. Maybe you could do the same. gl

[Vlad]

Sorry for my English. google translate for me.
Since yesterday, the exact same problem with my tablet. Tablet another (Odys Winpad V10), but the same sensors. I found this method:

—>Тынц<—-

Еverything works as expected now.

[Author]

Posts