TechTablets › Forums › Cube Forums › iwork8 Ultimate / iwork8 Air Discussion › Sd Card
- This topic has 11 replies, 7 voices, and was last updated 9 years, 7 months ago by
Riccardo.
-
AuthorPosts
-
May 10, 2016 at 6:38 pm #36684
Up
May 11, 2016 at 2:54 pm #36834My Adata 64GB microSDXC UHS-I works great in this tablet. Real speeds are up to 65/18 MB/s sequential read/write (see attachment).
Attachments:
You must be logged in to view attached files.May 23, 2016 at 4:52 pm #38376Did u do something special to your Windows? since i got a 64GB and 128Gb and just android can read it. And of course i enabled and rechecked that MS BUS options.
I cant use my SD CARD in windows :’v
May 26, 2016 at 9:35 pm #38715No, I didn’t anything. My unit has only Windows (from factory). But you aren’t only one who can use SD card only in Android.
June 2, 2016 at 2:39 pm #39618I managed to get my 64GB SD card to be usable by windows.Until recently, it was not working on my tablet (I got an exclamation mark with Error 10 in device manager).I recently decided to divide it in 2 parts (make a second partition for Link2SD in android) so I divided it in 2 primary partitions over MBR. One as exFat and one as ext2. Out of curiosity I booted back to Windows, and again no luck (still the error 10) . But since I wanted to check some files on it, I used an external card reader to read the SD Card. After having finished, I put the card back into the tf card slot, and I noticed I could still see it.I dont know if its just pure luck (that 1 in 10 times it works that people have mentioned happening), I dont know if connecting it to an external adapter initialized some variable that could not initialize by the TF adapter, or any Windows voodoo like that, or it was just a windows update running at the same time that updated the driver, but for the last couple of hours (and 3-4 restarts) I have a working 64GB Sdcard , that refused to work in the past.I ll let you know if it stops workingDisregard all that… Stopped working after half an hour.
June 3, 2016 at 2:20 pm #39716For some reason high speed cards don’t work well on these Chinese tablets.
I just bought 2 low speed Samsung Evo microsd and I put the 64gb into the iwork8, instantly recognised and working well.
June 3, 2016 at 4:51 pm #39728Could you post the exact model ?
June 3, 2016 at 5:18 pm #39733Its the Samsung Evo 48MB/s. I formatted it fat32 with fat32formatter and both android and windows are reading it fine now.
Attachments:
You must be logged in to view attached files.June 4, 2016 at 9:16 pm #39851Cheers
July 6, 2016 at 4:15 pm #42767I use a 128GB card (Silicon Power Elite 128GB SP128GBSTXBU1V20SP) in mine no problem, formatted as ntfs in windows.
My tablet is the cherry trail one.
November 8, 2016 at 7:09 pm #56610Well, now the SD reader failed under android too. Just great.
And yes, I’ve tried several microSD cards: it reads it randomly, failing to do that 9 times out of 10 and, even when it reads it, at reboot that very same SD card is gone again. Ironically, I’ve not the same problem on Windows, now. I’ve flashed the stock rom again and again; nothing changed.
This chinese tablet is the WORST purchase of my life, indeed.
-
AuthorPosts
- You must be logged in to reply to this topic.

