SD Card Reader

SD Card Reader

TechTablets › Forums › Jumper Discussion › EZBook series › SD Card Reader

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 8, 2018 at 3:58 pm #76617
    Hans
    Participant
    • Posts: 4

    Hello,

    I got my Jumper EZBook Pro 3 from Gearbest 6 weeeks before. At first everything worked smoothly. But since 2 weeks my 128GB SD Card from Sandisc does not appear in the Windows explorer anymore. Windows shows the SD Card as a Sandisc device, but this is all. I cannot work with the disk anymore. It seems the card reader and the driver are both ok, but the device is not mounted anymore.

    I tried it with other SD Cards, but they all were only recognized but not mounted.

    Has anyone an idea how to solve this`?

    January 9, 2018 at 12:40 am #76648
    Liam
    Participant
    • Posts: 26

    Have you ran the Hardware and Devices Troubleshooter in Windows 10? If it’s worked before, a recent Windows Update/change may be the culprit. If possible, I would recommend giving system restore a shot.

    January 9, 2018 at 7:55 am #76653
    Hans
    Participant
    • Posts: 4

    I also had this idea but it did not help to solve the problem. I even loaded a new SD driver, specially for Apollo Lake processor. The former driver from Intel was mentioned to be old. But this also did not help.

    January 10, 2018 at 12:35 pm #76710
    Hans
    Participant
    • Posts: 4

    I made a screenshot of my device manager. The SD card appears with the exact size of the volume. Also there are 2 volumes, which I does not understand why they are there. Has anyone any idea?

    Attachments:
    You must be logged in to view attached files.
  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar