Tablet not auto-mounting Micro SD card at bootup

Tablet not auto-mounting Micro SD card at bootup

TechTablets › Forums › Chuwi Forums › Chuwi Hi8 Pro Discussion › Tablet not auto-mounting Micro SD card at bootup

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 9, 2016 at 6:14 pm #25553
    Daniel Andersson
    Participant
    • Posts: 4

    For those who have gotten their tablets, do you have this problem where it doesn’t auto-mount the Micro SD card?

    I have to take the  Micro SD card out and re-insert it into the  Micro SD card reader for it to read the card at every bootup/restart.

    This is a real bummer, cause I wanted to use the SD card as an extended drive of some sort.

    February 9, 2016 at 8:44 pm #25561
    Alex
    Participant
    • Posts: 4

    What microSD card are you using? I have the very same problem with my 64gb Sandisc. But my 16gb card works fine and is recognized every bootup

    February 9, 2016 at 10:07 pm #25566
    Daniel Andersson
    Participant
    • Posts: 4

    I’m using a 64 GB Samsung Card, formatted in exFat.

    What format are you using for the 16 GB?

    Maybe I should swap in my 32 GB and try.

    Attachments:
    You must be logged in to view attached files.
    February 12, 2016 at 11:50 am #25798
    Alex
    Participant
    • Posts: 4

    the 16gb one is FAT32, the 64gb also exFAT. But last few bootups the 64gb one worked from the start… Maybe it’s due to the problem described here http://techtablets.com/forum/topic/hardware-fix-for-non-working-sd-reader/

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar