Teclast F7 Plus: Thermal mod questions

Teclast F7 Plus: Thermal mod questions

TechTablets Forums Teclast Forums Teclast Laptops Teclast F7 Plus: Thermal mod questions

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #151084
    JeanCraie
    Participant
    • Posts: 4

    hi 🙂

    -How thick should be the copper shim? (.8/ 1.0 / 1.5 / 2.0mm?)

    -Would you rather apply Grizzly Kryaunaut or Conductonaut ?

    #151517
    james
    Participant
    • Posts: 27

    Mine was about 1mm, wouldn’t want to go much thicker or thinner.

    #151527
    james
    Participant
    • Posts: 27

    The thermal mod does work great, but the only way I can get this thing running at full power(14w+) is to do the software mod with RW-Everything. I have disabled the CPU 1 state in advanced CPU settings in the bios, so it should be able to run at 14-15w indefinitely , but it only runs at this wattage for about 10 seconds,then throttles back to 6w max.  I have also disabled active cooling in Windows 10 so It isn’t that. With RE-Eerything set to 15w it stays at 14+ for as long as the programme, or game demands, but with just the TDP disabled in the bios it will revert back to 6w max, bit disappointing as the unlocked bios was one the reasons I went for the Teclast. And I didn’t want to keep running the software every time when booting up.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Lost Password