teclast X80 Plus bootloop

teclast X80 Plus bootloop

TechTablets › Forums › Teclast Forums › General Discussion › teclast X80 Plus bootloop

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 31, 2016 at 10:24 am #31467
    Pelleri Makkonen
    Participant
    • Posts: 5

    Same problem with my x80. I hope someone have an answer…

    August 7, 2016 at 7:23 pm #46037
    Fritz
    Participant
    • Posts: 1

    I have the same problem on my X80 pro. After trying to reset Windows 10, I got into a boot loop on the <span style=”line-height: 1.5;”>Windows side of the system. The tablet starts to the OS chooser and then restarts after selecting Windows. So far I tried to boot from an USB drive with Win 10 on it, in order to repair the Windows installation. But although the drive is recognizing in the bios, the tablet doesn’t boot from it.</span>

    Does anybody have any advice how I can get back the Windows system?

    Many thanks,

     

    Fritz

    September 5, 2016 at 2:53 pm #48902
    yokese
    Participant
    • Posts: 7

    It happens to me the same trying to reinstall Windows after reboot in a Teclast X80 Plus. The solution in my case was to enter the BIOS and disable ‘fastboot’ or at least, put it only to ‘partial’ from USB (not ‘full’, that’s the problem).

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar