Teclast x80 pro black screen and reboot on startup

Teclast x80 pro black screen and reboot on startup

TechTablets › Forums › Teclast Forums › X80 Series › Teclast x80 pro black screen and reboot on startup

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #71358
    Someone
    Participant
    • Posts: 3

    SOLVED: Solved it by going into the BIOS (connect keyboard on the OTG cable and pres “del” when bootlogo appears), then force boot “Windows recovery” (under the “boot” tab), then do a full reset (the one that deletes your data but doesn’t clean the drive which takes hours).

    Then it got stuck again, this time on 81%, but I let it run while charging and it resetted itself. If this doesn’t work I also had a FAT32 formatted 8GB SD card in it which someone suggested, so this could be the thing that made it work.

     

    Hello everyone,

    I tried resetting Windows 10 and it got stuck on 55%, I rebooted it and it says it had a problem, now whenever I want to boot to Windows 10 I just got an black screen for a few seconds and then it reboots (bootloop).

    After that Android still worked and I suddenly stopped getiing the part where you can select if you want to boot Windows or Android, it just goes straight to Android.

    But then one faithfull night I pressed the power button in Android and selected “boot to Windows” to see what would happen. Now it continously tries to start Windows which doesn’t work and I don’t know what to do.

    Any help is appreciated!

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar