Teclast X98 AIR III flash failed

[ProfZebu]

Dear all,

 

Please help. I tried to flash with the STOCK ROM my newly bought Teclast X98 AIR III after the 3D crashes. Unfortunately at 90% flashing failed and now it was not booting. After that I tried to install MIREK ROM, it has been completed but now it is not booting…. blank screen.

 

Please help how can I revive it? 🙁

Attachments:

You must be logged in to view attached files.

[Thomas]

Hi ProfZebu,

in the meantime, i fixed my problem, as can be seen there.

 

greetings

-tomatello

[Glen]

I had that exact same screen coming up on mine when I tried to flash Mirek’s v6.1 rom (air ii version) to my Air III.  After trying five times and getting the same thing on the screen, I realised downloaded TechKnight’s version of the MFG and it worked.

TechKnight had a slightly different PID (or SID… one of them) to the ones that were written in the official Teclast tutorial in Chinese.  Once that PID (or SID) changed, it worked and flashed successfully.

[Andre]

Glen wrote:

I had that exact same screen coming up on mine when I tried to flash Mirek’s v6.1 rom (air ii version) to my Air III. After trying five times and getting the same thing on the screen, I realised downloaded TechKnight’s version of the MFG and it worked. TechKnight had a slightly different PID (or SID… one of them) to the ones that were written in the official Teclast tutorial in Chinese. Once that PID (or SID) changed, it worked and flashed successfully.

Can you tell me what PID and SID you used?

[Author]

Posts