teclast x98 pro shutdows

[Anonymous]

Read the posts on the forum BEFORE posting a new thread. There are several posts about this.

Start by connecting a USB keyboard, press Esc while the tablet boots to enter the BIOS.  Set IGD Turbo boost to disabled.

If you’re using it in Windows, you need to change a few values on the Power profile. Check the  5TH STICKY post in this forum

http://techtablets.com/forum/topic/solution-to-crash-in-windows-black-screen-and-not-booting-afterwards/

Sticky posts are there for you to read BEFORE posting questions, as most answers are there.

[kunglao]

Hi,

sorry for my previews post I didn’t see the sticky or the other post about this problem I was just too upset for my tablet not working.

Do you know if after doing all what’s said in the other post it’s needed a bios update?

If I did understand correctly I should just change the bios settings as you said and then the power management from windows nothing else am I right?

 

Thank you and my apologies again.

 

[TAEL]

kunglao wrote:

Hi, sorry for my previews post I didn’t see the sticky or the other post about this problem I was just too upset for my tablet not working. Do you know if after doing all what’s said in the other post it’s needed a bios update? If I did understand correctly I should just change the bios settings as you said and then the power management from windows nothing else am I right? Thank you and my apologies again.

IGD option is present in both BIOS version and there’s no need to update.

[kunglao]

thank thanks thanks thanks thanks
finally i can use this tablet

I managed to get into the bios
and change the setting by pressing the “delete” key is not “esc”
I used the tablet on Android without any block

following the guidance to change the setting in Windows 10
I can not find the setting
Processor power management
not ‘listed

how do I fix?

you have other suggestions to optimize this tablet?
thank you

[Anonymous]

As I told you above, that’s explained on the 5th post in the list

http://techtablets.com/forum/topic/solution-to-crash-in-windows-black-screen-and-not-booting-afterwards/

Which tells you to download a .reg file from this site:

http://www.eightforums.com/tutorials/51043-power-options-add-remove-system-cooling-policy.html

That .reg file will add the “System cooling policy” to the power options, it must be in “Passive”, this is a tablet, not a laptop, it does not have a fan.

[kunglao]

Hello guys
I write to you again
because they are always in the same situation

some time ago
I followed your instructions
and I changed the setting in the bios
to prevent the tablet turn OFF

after the change for a few days it worked normally

but now he has started to shut down mysteriously
no chance turning it on again

Only after hours can turn the tablet

how can I fix it before providing warranty

thank you

[Author]

Posts