Thermal mod. Can I use two 10mm copper shim?

Thermal mod. Can I use two 10mm copper shim?

TechTablets › Forums › Cube Forums › Cube Mix Plus › Thermal mod. Can I use two 10mm copper shim?

Tagged: ,

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 12, 2018 at 11:58 am #76796
    Anonymous
    Inactive
    • Posts: 46

    Hi! I´ve bought two 20mm copper shim, but they sent me 14mm 🙁 .  (Not 10 mm. My mistake) . May I use that two copper shim to cover the micro? (not one above the other) or one would be enough? Thanks!

    January 12, 2018 at 4:46 pm #76824
    Anonymous
    Inactive
    • Posts: 46

    Before open my Mix Plus, I´ve tried it with a broken Cube i7 Stylus to show you what Iam saying (I guess the microprocessor of Mix Plus has the same size. Right?).  Do you think this may work? is it to risky? Here I toke photos.

    January 12, 2018 at 11:14 pm #76861
    Anonymous
    Inactive
    • Posts: 46

    So… ¿Could it be enough a 14 / 15mm copper shim for the Cube Mix Processor? (I am a bit scared to open it yet, but in videos it seems to be smaller than i7 Stylus processor). Hello?  Algorithm? Chris? Superman? XD

    January 14, 2018 at 3:07 am #76932
    Anonymous
    Inactive
    • Posts: 46

    Ok. I´ve just found Chris answered same question on the video´s comments. He says 15mm its ok. Thanks.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar