Thermal Throttling after mod

Thermal Throttling after mod

TechTablets › Forums › Chuwi Forums › Chuwi LapBook Series › Thermal Throttling after mod

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 16, 2017 at 7:35 pm #67051
    Phoenix
    Participant
    • Posts: 12

    I too have done this Themal Mod. Thank you for the video. Works great. Now from 95 decrees (cpu benchmark) to 65 decrees!
    But i noticed in hwinfo that the cpu still got lowerd in mhz to 1600 mhz instead of 2100-2200…
    Why is that?
    I turned DPTF off in the bios, selected performance power management in Windows 10, turned down battery saving in intel management for gpu(?) still i get that lower mhz when stress benchmarking the cpu… Is there an option i missed?
    Somebody?

    July 13, 2017 at 4:05 pm #69177
    Thomas
    Participant
    • Posts: 52

    isn’t the normal speed 1.1ghz and turbo on a single core is possible to 2.2 and on more than 1 core I bet the maximum is only around 1600.  This is only guess work so don’t shoot me.

     

    July 13, 2017 at 4:28 pm #69178
    Thomas
    Participant
    • Posts: 52

    with prime95 going mine never gets about 1200 mhz in hardware info 64.

    I wonder if this is correct?

    July 13, 2017 at 5:41 pm #69183
    Thomas
    Participant
    • Posts: 52

    <!–more–>I reckon that chuwi might have under clocked these in the bios because the newer hardware revision models have locked Bios.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar