Tiny USB 3.0 flashdrive for permanent use

Tiny USB 3.0 flashdrive for permanent use

TechTablets Forums Chuwi Forums Chuwi Hi12 Forum Tiny USB 3.0 flashdrive for permanent use

  • This topic has 4 replies, 5 voices, and was last updated 10 years ago by Lee.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #43989
    Jirka Toksa
    Participant
    • Posts: 13

    Yes, there are ways how to share a microSD card between Android and Windows (root or partitioning).

    But they’re both tricky, unoptimal, with consequences. And maybe you need even more space…

    So how about those ultra tiny USB 3.0 flashdrives?

    I’ve found those two:

    https://www.sandisk.com/home/usb-flash/ultra-fit-usb

    http://www.samsung.com/us/computer/memory-storage/MUF-128BB/AM

    Anybody tried them?

    How fast they are? (compared to fast microSD)

    How tiny are they in reality? How big part of them remains outside the tablet’s body?

    Are there any other options than Samsing Fit and SanDisk UltraFIT?

    Are there differences (in dimensions and speed) between 32, 64 and 128 GB versions? Because in this case I’d probably prefer smaller formfactor over the capacity…

    I don’t need an ergonomic shape of the flashdrive because I plan to leave it inside the tablet forever (because I plan to install applications on it – I”d rather leave the whole eMMC space to the operating system, we all know the ability of Windows to grow).

    So any experience with these? Or recommendation for other/better?

    ___________________

    Related problem: how about swapfile, hyberfile? And how about readyboost? The idea is to have swap and hyber on SD card and readybost on flashdrive (or vice versa). Would it improve the performance? My experience with weak Atom laptops (with slow harddrives) is that it helps a lot to have a fast SD card in the laptop’s cardreader for readyboost caching…. But question is whether it makes any sense with eMMC.

    #44010
    Chris G
    Keymaster
    • Posts: 2677

    I have the 32GB Sandisk fit, it’s not to bad, good reads speeds writes are around 30mb/s only however. So are you planning to solder it inside the tablet, please take some photos of it once you install it.

    Chris | Admin
    Please support us and help keep TechTablets online. Affiliate revenue is used to pay for the server, studio apartment (Techtablets HQ) and buy new tech to review. Without it, this site would be dead.
    Next up for review:
    Ordered and waiting for my: BMAX S15 & Teclast F6 Plus
    Currently testing: LG G8X & Redmi K30

    #44075
    Justinkeyback
    Participant
    • Posts: 117

    I inserted a micro sd card 32 gb in my very tenacious microsd card slot and formatted it in Android. No problem at all. It is accessible in both W10 as in Android.

    #44156
    Rogus Mortem
    Participant
    • Posts: 112

    I own a Sandisk ultra fit 128GB and it runs really hot. Do not buy it!

    #44222
    Lee
    Participant
    • Posts: 14

    In one of the pictures on the internals there seems to be 4 solder points at the top on the mainboard. To me that looks like a USB plug point but I will need to crack the case open first to confirm.

     

    Now if it is USB then its probably only 2.0 so not the fastest but I think it would be worth an integral storage mod with a large capacity dongle and all the casing removed

     

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar