I’ll try and make this post brief for readability;
If you were in the same situation I was in where Double Driver did NOT WORK and many devices, notably touch, rotation sensors.etc fail to work no matter how many times and ways you install the drivers, you MUST make sure your tablet is in WINDOWS MODE and NOT ANDROID MODE!
To Switch to Windows Mode, Android Mode, OR to check which mode your tablet is currently on, do the following;
1.) Make sure Tablet is completely shut down
2.) Hold the POWER button and the VOLUME DOWN button at the same exact time
3.) a Windows logo and an Android Logo will appear onscreen, with one of the logos flashing, this is your currently selected mode
4.) to navigate between modes; use the volume up and down keys, then when you have the Windows Logo selected, press the power button
5.) Double Driver should now properly work for you!
.
