TechTablets › Forums › Teclast Forums › X80 Series › Touch Screen reversed
- This topic has 2 replies, 2 voices, and was last updated 7 years, 7 months ago by
Klosteinmann.
Viewing 2 posts - 1 through 2 (of 2 total)
-
AuthorPosts
-
April 18, 2017 at 12:23 am #65521
I found the file I needed 🙂 This worked for me on an x80 plus ID H6C4 with a full disk format and fresh install of windows from the mediacreationtool (which installed windows home, no key needed).
After the install you’ll need to also install the drivers which are found in the downloads section on this site. If the touchsettings.gt file from that download doesn’t work then try this one, it worked for me 🙂
[Setting]
;UpdateCFG=0
SendCFG=1 ;Send CFG to touch IC when loading driver
SleepDisable=0
PhysicalXsize=1733 ;Physical size£¬the unit is 0.1mm
PhysicalYsize=1087[Support]
ESD=1 ;Driver supports ESD recovery processing
;SensorID=5 ;According to the different SensorID send different configuration
GtpTool=0 ;GuitarTestPlateform tool support
X2X=0
Y2Y=0
X2Y=0
Log=0
Flashless=0
ICType=GT911
PrtScreen=0
CtrlAltDel=0
HomeKeyTouchTime=3
VolumeKeyEnable=1
resetRevert=0 ;reset level revert[Feature]
Pen=0 ;stylus/pen support
NumberOfKey= ;The total number of keys supported,equal to 0 does not support key
Key1= ;0xe3 is home key,Must be a hexadecimal number
Key2=
Key3=
Key4=[CFG]
DefaultCFG=0x00,0x20,0x03,0x00,0x05,0x05,0x35,0x00,0x01,0x08,0x28,0x0F,0x50,0x32,0x03,0x05,0x00,0x00,0x00,0x00,0x11,0x00,0x08,0x18,0x1A,0x1E,0x14,0x8C,0x2E,0x0E,0x1B,0x1D,0xA6,0x0F,0x00,0x00,0x00,0x82,0x03,0x1D,0x1E,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x14,0x3C,0x94,0xC5,0x02,0x07,0x00,0x00,0x04,0x8A,0x16,0x00,0x80,0x1B,0x00,0x76,0x22,0x00,0x6C,0x2B,0x00,0x62,0x36,0x00,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x1A,0x18,0x16,0x14,0x12,0x10,0x0E,0x0C,0x0A,0x08,0x06,0x04,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2A,0x29,0x28,0x26,0x24,0x22,0x21,0x20,0x1F,0x1E,0x1D,0x1C,0x18,0x16,0x14,0x13,0x12,0x10,0x0F,0x0C,0x0A,0x08,0x06,0x04,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xA7,0x01
senserid_0=
senserid_1=
senserid_2=
senserid_3=
senserid_4=
senserid_5=November 9, 2018 at 5:20 pm #148034Didn’t work for me Teclast X80 Pro E3E6
-
AuthorPosts
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.

