TTT TecKnight’s Teclast Tutorials series
Procedure: Install the Intel MFT on a Windows PC
Required:
1. A PC running Windows 7 or higher with an available USB port
2. A customized installer of Intel Mfg Flash Tool bundled with the required drivers, 2 preconfigured .INIs and 3 .BAT files to perform the installation.
Download Intel_Mfg_Tools_X98_Custom.zip
Step by Step instructions:
1. Extract archive to a folder on your target Windows PC.
2. Browse to the folder and launch:
1-InstallDrivers.bat
3. The batch file will install the Intel Android drivers, ver 1.10
If the installer reports you already have a version of the driver installed, allow it to uninstall the old driver and install the new one.
4. Launch:
2-InstallMFT.bat
5. The installer will proceed to install the Flash Tool.
6. Right click on
3-RunAsAdmin-ApplyCustomConfig.bat
and select Run as Administrator. This script copies the CUSTOM_CONFIG.INI to the MFT install folder and also copies Manufacturing Flash Tool.INI to the PROGRAMDATA folder. It needs admin rights to copy to the install folder.
7. Congratulations, your MFT is now installed and configured.
If you have a ROM you need to flash, you can now proceed to:
Flash an Android image (ROM) to your Teclast X98 Air device
_________
Change Log:
9/13/2015 Removed iSoC drivers from install archive, batch file, and instructions, after reading a passage in MFT user guide that implied iSoC drivers were not needed on Baytrail devices. I then tested the theory and was pleased to be able to confirm that iSoC drivers are not needed,. The iSoC drivers may, in fact, be causing some of the USB enumeration issues we have been seeing. For more details, see this post.
9/11/2015 Updated Intel adb driver to ver 1.10.0
7/19/2015 Added reference to 3rd .BAT file and the need to run as administrator.
7/15/2015 Created initial procedure.
.
