Unstable Jumper Ezbook 3 v4

Unstable Jumper Ezbook 3 v4

TechTablets › Forums › Jumper Discussion › EZBook series › Unstable Jumper Ezbook 3 v4

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 31, 2018 at 11:01 am #78100
    Felice
    Participant
    • Posts: 2

    Hi to everyone!
    I have a Jumper Ezbook 3 v4, I have bought it a couple of months ago and I am still fighting to make it fully working.
    Premise: I have added a 120gb Western Digitale SSD to the laptop, following the techtablet tutorial.
    Tried to install Windows 10 on the SSD: it seemed to work fine for a while, then problems happen!
    Basically, when booting, sometimes Windows 10 starts without problem, sometimes a DOS command screen appears, then, if a boot again soon after,
    the Windows 10 recovery blue screen appears. Then after some boots, Windows 10 starts.

    I suppose that sometimes the system tries to boot from the original MMC hard disk.
    How can I solve this problem?
    Thanks in advance to all!

    January 31, 2018 at 11:20 am #78101
    Felice
    Participant
    • Posts: 2

    This is the boot screen that randomly appears on my laptop

    Attachments:
    You must be logged in to view attached files.
    February 1, 2018 at 9:18 pm #78200
    vicen
    Participant
    • Posts: 17

    hi, try changing the boot order in bios to the windows bootloader.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar