Voyo V3 Flagship Bios Black Screen

[Johannes Müller]

Hello everybody,

after i have searched the whole internet for a solution i need your advise.

After a BIOS Update on my Voyo V3 Flagship the screen stays black the whole time. Before the Bios Update the screen was black but after a few seconds the Windows login screen appeared.

I found out, that the BIOS is a insydeh2o , but i struggeling with the phoenix slic tool to find the correct bios filename to initiate a recovery flash from a usb stick.

 

I really need your help please.

 

Best regards

John

[Chris G]

You might have to use a USB flasher + clip and reflash the bios. Sounds like it failed or the screen has failed. Have you plugging in HDMI and see if there is an image. Or any audio?

Chris | Admin
Please support us and help keep TechTablets online. Affiliate revenue is used to pay for the server, studio apartment (Techtablets HQ) and buy new tech to review. Without it, this site would be dead.
Next up for review:
Ordered and waiting for my: BMAX S15 & Teclast F6 Plus
Currently testing: LG G8X & Redmi K30

[Johannes Müller]

Hi Chris,

yeah i connected the voyo with a micro hdmi to my tv, but no signal.

I have a winbond w25q64jvssiq chip, what things in sepcial do i need to perfom the flash?

http://www.ebay.de/itm/SMD-SO16-SOP16-SOIC16-zu-DIP16-DIL-16-IC-Sockel-Adapter-300-mil-SOP8-2-54mm/172316412034

Found this adapter, so how this works? I plug the adapter above the chip and connect it to my pc with a soic clip?

 

Thanks

Best regards,

John

[Author]

Posts