Wifi Bluetooth and Camera Not Working after upgrading SSD

[Katagiri]

Solution for camera at the bottom. http://techtablets.com/forum/topic/problems-with-camera-drivers-after-format-and-windows-10-reinstall/

Did you clone it or did a fresh install?

[Kunc]

I clone it using macrium reflect software..

I think the camera problem is not about the driver as the one in my cube is still the same version

[Katagiri]

Do you have the old SSD? Can you put it back and test?

If it works, try to clone with another app like Aomei, I always use Aomei flawless. http://www.backup-utility.com/

[Kunc]

Thanks God the problem is not the hardware, cause after put the old SSD back and start, everything was just fine.

Let me try the tool you recommend and get back to you once done.

Thanks a lot mate!!

[Wylver]

Or you know, perhaps just do a clean Windows install on the new SSD?

Much easier…

[Katagiri]

Kunc wrote:

Thanks God the problem is not the hardware, cause after put the old SSD back and start, everything was just fine. Let me try the tool you recommend and get back to you once done. Thanks a lot mate!!

That happened before with the same tool you used, maybe it’s not cloning everything. At least Aomei says it works well with SSDs even cloning HDDs to SSDs.

If it doesn’t work you can try a clean install like Wylver said.

[mrobi]

I’ve used Veeam Endpoint Backup for restoring whole volume back to bigger SSD. Has been working just fine + backup restore test done.

[Kunc]

hi Guys!!

 

So, i had no luck with the cloning attempts, both using Macrium or the one you suggest failed with different symptoms (the macrium caused the driver for camera worked poorly, wifi and bluetooth didnt work), the other made the startup failed.

So, i tried a fresh install of Windows 10, and ended up with pretty good result. My Cube i7 book works fine now. But one other problem happened, the camera is not working.

Have checked to the thread mentioned above, but seems mine has different problem cause the two Control Logic drivers are in the same version as required in the thread solution.

So, don’t know what to do know cause every single driver already installed with success message on each installation.

 

Btw, the way i cloned using macrium and the other one was something like this:

1. Start up Cube i7 windows, and install the cloning software.
2. Start the cloning software and make clone of the drive C (which is in cube i7 should copy everything, including the system, recovery and the other partition)
3. Dismount the old SSD and mount the new one (the bigger one with cloned windows from previous SSD)
4. Start the Windows, and…..
   1. Macrium –> windtab32.dll error at logging in, camera wifi bluetooth not working
   2. Aomei –> Going to the Repair windows screen, and couldnot do anythin
5. So decided to put back the old SSD

 

Okay, forget what i’ve done with the cloning,. anyone help me with the camera please…

[John Macie]

you have the drivers from the download section here, right? The camera drivers are in the media folder. You need to go into device mgr and find the camera and uninstall it, then highlight your computer name in device mgr and hold that til it says it to scan for new hardware changes. When it locates the camera(new hardware) point it to that Media driver folder to get the drivers. Or just try to update camera on the drivers by pointing at that media file drivers folder. Good Luck

[Kunc]

Okay, let me check the media driver. I have installed all drivers in the driver folder downloaded from techtablets for i7 book, but let me check again about the media driver you mentioned. Thanks.

[Katagiri]

I found instructions from Veeam.

Creating recovey media https://helpcenter.veeam.com/endpoint/15/image_create.html

Using it https://helpcenter.veeam.com/endpoint/11/howto_baremetal_recovery.html

BIOS should be UEFI, is yours UEFI?

[julia roberts]

I was in Sheffield, waiting for my car to be fixed. The mechanic said “an hour,” which means three. Bored stiff, I tried needforslot. I’m careful with my data, but it looked secure. Played poker. The table was loose. I bluffed a few times, got caught once, but then won a massive pot with a full house. The repair bill was covered by the time the car was ready. Best garage visit I’ve ever had.

[Author]

Posts