Windows update screwed up SD slot

Windows update screwed up SD slot

TechTablets Forums Teclast Forums X98 Plus Discussion Windows update screwed up SD slot

Viewing 15 posts - 16 through 30 (of 31 total)
  • Author
    Posts
  • #28838
    Gal
    Participant
    • Posts: 307

    sadly that’s not the issue here. The reader works fine, until it suddenly doesn’t. Not sure why it started. The problem is with the SD storage class controller.. driver issue because it works fine in Android.

    #28935
    Anonymous
    Inactive
    • Posts: 38

    I did the bios update but on reboot got a windows update. Had exclamation on SD storage class controller so did the bios update again. Still got exclamation on SD and error code 10 device cannot start. Will not find a driver update. Used to have three SD storage class controller in device manager, now only two. Also lost PIN ability to logon to Windows and fast switch tablet/desktop mode. Also will not rotate, stuck in portrait. I think I am going to forget Windows and just use Android, a shame because that’s why I bought a dual boot tablet.

    #28947
    Gal
    Participant
    • Posts: 307

    Neil, I can help get everything right with windows.  with that in mind, last time I tried PIN didn’t work and I also get the error code 10.

    #28957
    Anonymous
    Inactive
    • Posts: 172

    Users should note that the latest Bios update posted by Gal and later by his seller OKQI with the note, it didn’t work for me but you should try a random file posted on Mediafire, IS NOT a Teclast official file. It has still not been posted on the Teclast bbs.

    Some seem to have problems due to the previously posted unsigned Win 8 drivers that may have burned out your hardware or SD cards.

    Only use OFFICIAL Teclast updates if you want to avoid the problems these jokers are having 🙂

    #29019
    Gal
    Participant
    • Posts: 307

    Well,  good luck with waiting for official Teclast update.
    This file came from a Teclast contact of OKQI. It proved to be legit already.
    People just need to be sure they have the A5C8 model.

    #29026
    Anonymous
    Inactive
    • Posts: 172

    The Teclast official has posted it on the BBS. The file is dated March 8th.

    It is on this page, under TF card fix heading.

    http://bbs.teclast.com/thread-521232-1-1.html

    Max

     

     

    #29027
    Gal
    Participant
    • Posts: 307

    So now it’s official, the file was legit.

    #29033
    Richard Steel
    Participant
    • Posts: 20

    Also having this issue. 64gb card was working after bios update, now it back to code 10 cannot start in device manager.

     

     

    #29034
    Richard
    Participant
    • Posts: 7

    I’ve just tried the update but all I get is ‘update failure’ The X98 is connected as a media device to my PC. Do I need to install any drivers first?

    #29035
    Richard Steel
    Participant
    • Posts: 20

    The bios update? That needs to be run from the tablet, make sure the file is unzipped to C: first. This thread is discussing the return of the issue after updating windows.

    #29055
    Richard
    Participant
    • Posts: 7

    Ah! That explains it. Thanks.

    #29071
    Gal
    Participant
    • Posts: 307

    Richard, please update here if you figure out the code 10 issue.

    #29072
    Chris K
    Participant
    • Posts: 32

    @Gal how did you mange to use the ntfs formatted sd card in android? i have the same here, in exfat format but only windows will show it.

    #29075
    Gal
    Participant
    • Posts: 307

    Exfat didn’t work for me in Android. Did you try NTFS?

    #29076
    Chris K
    Participant
    • Posts: 32

    not yet because in my understanding ntfs is not supported by android.

    but i will give it a try. hope it works with the unrooted factory image.

Viewing 15 posts - 16 through 30 (of 31 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar