TechTablets › Forums › Teclast Forums › Core M Tablets (X1,X2 and Teclast X3) › X2Pro
Tagged: Teclast X2 Pro, wifi, X2 Pro
- This topic has 565 replies, 61 voices, and was last updated 9 years, 7 months ago by
Ja.
-
AuthorPosts
-
May 26, 2016 at 10:20 am #38659
after analysing drivers etc, I think something wrong is with the realtek wifi driver, when i conect to net disk starts to lagg and after that ,,critial process died”, I connect to net via cable (sharing from phone) and everythink was good, could you propose any solution ?
have you opened it? The same thing happened to me and @Anton, after opening the tablet and replacing the termal pads, the wifi-antenna short-circuit somehow
May 26, 2016 at 1:56 pm #38680Yes I did, replaced termopad, but i did nothing with Wi-Fi :/
May 26, 2016 at 6:29 pm #38696There’s your problem
May 26, 2016 at 8:12 pm #38710don’t sound good :/ have you solve your problem somehow ? I have already order small wifi stick becouse tablet without wifi wont be good idea :/
May 27, 2016 at 8:07 pm #38830They way I solved it was that I sacrificed a usb-port and soldered on a usb-wifi card to it.
http://postimg.org/image/g6nyeqquv/
May 27, 2016 at 10:57 pm #38857Nice! If i would feel that having only one usb free is uncomfortable i will do something like you 🙂 I get today huawei modem but of course seller do not give me antenas… Do i need something special for it? Because ,,original,, one are ended with special plate, I asked also in local store but that small antenas interfaces are hard to get in my town.
May 28, 2016 at 10:04 am #38894I beleave what you are searching for is something like this
May 28, 2016 at 11:47 pm #38952<!–more–>thank you Daniel 🙂 if my local store wont find any antena I would order on Ali 🙂 we will se. That is not so good that only opening case could make so much trouble to user :/ I wish teclast would work becouse to full option only stylus is missing but even with keyboard etui and lte/gps modem it is still decent tablet 🙂 Let me ask you last question, have you mod cooling inside the tablet in some innovative way, or you have just replace the main termopad(~50mmx50) becouse i made it and temperature difference is ~2-3°C :/
May 29, 2016 at 7:04 am #38974I basically copied @Anton heatsink that you can find on this page if you scroll down a bit. It lowers the temp to around 72 degrees under max load
http://techtablets.com/forum/topic/x2pro/page/29/#post-26254
May 31, 2016 at 10:00 am #39312thank you 🙂
only one more problem :/ I’ve received http://pl.aliexpress.com/item/HUAWEI-LTE-MODULE-ME906E-704031-001-FOR-HP-lt4112-LTE-HSPA-Gobi-4G-Module/1914502372.html but now I realised that it is for HP systems, when I plug it into tablet system can’t recognise device :/
I think I will ship it back to china and order unlocked one one more time, my fault :/
June 1, 2016 at 2:17 am #39422You don’t have to send it back. It is fully compatible with the X2 pro. You have to install drivers
June 1, 2016 at 2:54 am #39424<p dir=”ltr”>Oh, so now you killed me, I download some drivers but modem couldn’t recognize them saying that unknown device is the most actual driver for device. Sory that i’m asking but have you got checked one web page where i can download drivers which should work?</p>
June 1, 2016 at 5:15 pm #39504see if you can download from my onedrive. Just download all the files and run some installers and update the firmware and you should be good to go!
June 1, 2016 at 5:17 pm #39505<hr />
I think you forgot to paste link to your disk :/
<hr />
June 1, 2016 at 5:23 pm #39507 -
AuthorPosts
- You must be logged in to reply to this topic.

