X80 poor wifi

[galih wicaksono]

Richard wrote:

Hi, Yes managed to remove the x80 Power case, haven’t got any pictures but in terms of procedure:

1. The back case is all metal, to get started I went for one of the corners (joint where the metal touches the plastic) with a knife – take real care with this step as it’s a) tight b) you don’t want to scratch the case c) most important make sure the sharp object can’t slip or if it does it’s well away from you and the screen!
2. Once the corner popped off just used an old plastic card like in @amacar‘s video above, takes a little jiggling and pulling but was pretty easy.

Can take a picture of the back case if that’s helpful with seeing how its constructed?

Hey Richard

I was take a picture tablet, which one from the picture i must start open case x80 power

 

Sory for my bad english

Attachments:

You must be logged in to view attached files.

[Joezi]

Hello, I have just opened my X80 Pro. I can see that antenna cable is shortened. Furthermore, I determined that the cable is connected to the ground. There are two soldering points on the board. These are minus and plus. Do I have to desolder the minus contact to get a better connection?

Many thanks in advance!

[Joezi]

Hi Peter, did you put the internal cable onto the “plus” contact and the mass onto the “minus” contact?

[Author]

Posts