X98 Air III (M5C5) brick

X98 Air III (M5C5) brick

TechTablets › Forums › Teclast Forums › X98 Air 3G / Air II – Single and dual boot › X98 Air III (M5C5) brick

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 13, 2016 at 9:42 am #22188
    Damian
    Participant
    • Posts: 3

    Hello everybody,
    After a flash I have  brick my tablet. Now I have the clip and the programmer ordered me to flash the BIOS directly. I have made a mistake. I damaged 2 resistors or other components while placing the clip. Does anyone know the components(I suspect resistors) and what size / unit have those things, so I can order them and soldering

    Please help me 🙁

    Attachments:
    You must be logged in to view attached files.
    January 13, 2016 at 2:45 pm #22218
    Michiel
    Participant
    • Posts: 37

    Since you already have your tablet open, I’m wondering if there are solder tags for extra usb on the mainboard like the x98 pro has. Could you check? Thanks!

    x98 pro usb mod is here: http://techtablets.com/forum/topic/add-a-full-size-usb-port-on-x98-pro/

    January 15, 2016 at 7:55 am #22395
    Martynas
    Participant
    • Posts: 24
    Damian wrote:

    Hello everybody, After a flash I have brick my tablet. Now I have the clip and the programmer ordered me to flash the BIOS directly. I have made a mistake. I damaged 2 resistors or other components while placing the clip. Does anyone know the components(I suspect resistors) and what size / unit have those things, so I can order them and soldering Please help me :-(<noscript>:-(</noscript>

     

    Why do you think you have damaged these parts? Because you are unable to flash chip?

    January 15, 2016 at 1:46 pm #22432
    Damian
    Participant
    • Posts: 3

    The chip has been successfully flashed, but the tablet remains dark. Ok new pictures and as far as I’m already come

    Attachments:
    You must be logged in to view attached files.
    January 15, 2016 at 1:51 pm #22435
    Damian
    Participant
    • Posts: 3

    @Michiel

    A device is in the case but I can not find the connectors on the board

    Attachments:
    You must be logged in to view attached files.
    January 18, 2016 at 5:06 pm #22892
    Michiel
    Participant
    • Posts: 37

    Okay, thanks for taking a look (btw, your picture doesn’t really clarify anything… a pic of the main board or something would have made more sense to me, but if you say the points aren’t there, I take your word for it).

    May 2, 2016 at 4:09 pm #35821
    dion
    Participant
    • Posts: 3
    Damian wrote:

    The chip has been successfully flashed, but the tablet remains dark. Ok new pictures and as far as I’m already come

     

    Hi Damian.

    Did you change the resistors? How did you know that you were having 1 10 ohm resistor connected to your board?

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar