X98_PRO_android_5.1_mirek190_v6.0 rom

[Karl0ss]

Tamás wrote:

Hello there!

Thank you Mirek for this awesome rom! I only used Windows since november, but with your rom, I love the new feeling of this android tablet!

I have only two questions:

Is there any way to use the android stock launcher? I dont need the addons of the Apex, and this launcher reloads every widget and button when I go back to the homescreen.

The other question of mine, all of you have the volume up, down and screenshot buttons on the navbar? Can I get rid of it?

Keep up the good work! <noscript></noscript>

ps: Both cameras work here.

Its quite widely known that the battery is not as good in android as windows, that is one of the thing mirek has tried to sort, and has made great improvements.. so if you think it’s bad now, it was alot worse, personally, I don’t have any real problems with my battery..

In regards to the navigation bar buttons, that is exact what my UI Patcher does I posted on this forum…

people need read the threads insted of just asking the same questions all the time 😉

[Abraham]

Thank you Mirek for your work,

I have a question for all that uses Bluetooth headphones or speakers,

I planning to buy Bluetooth speakers and I tried to use my headphones bt 2.0 Motorola s9  to check the sound quality trough BT, and I observed that when I use streaming video is not loading properly, getting stuck every second, but it load fast again as soon as I disconnected.

anyone observed this problem?

thanks

[Jean Marc]

Thanks a lot Mirek, I done dirty Flash, everything is fine until now. The speed also is better over Android.

I use Autodesk SketchBook on Android and also on Windows, the drawing on Windows is immediately responding, but over Android there is a delay, it doesn’t register the drawing at the time touching the screen but a little bit later. Over windows it is perfect. Is there any thing I can do for that, any setting maybe?

Thanks again, it is great a job.

J-M.

Ps. By the way I am glade to subscribe at this forum because I didn’t found any direct support from Teclast, other than here?!

 

 

[mirek]

Pedro wrote:

Mirek, I also would love to use your ROM on the X16 Power.

If you want roms on x16 pro – buy me that device 🙂

[mirek]

David Nurdin wrote:

Mirk,

I flashed the 3.0 and now the build number on my tablet is V1.03_20150916, is this correct?

Yes is fine

[mirek]

adam wrote:

Let him decide.

Maybe is only simple problem not the driver.Driver was my guess.

Mirek what do you think ,why after loading your rom in to x16pro unit boot up to Lock screen and get stock (no responsive to touches) ?

Thank you

It is not simple – if touch screen nor works – that’s meant kernel do not have the proper driver – driver must be compiled with kernel otherwise will not work.

[mirek]

Nuno wrote:

Pingus wrote:

Hello, thank you for that great piece of work. I received my x98 pro (so K9C6) few days ago, instantly flashed your rom and it’s really nice. The camera is not working either on the K9C6. Seen your first post saying K9C3 had a camera issue, don’t know if you meant K9C6 has also the issue. Anyway, not a big loss for me. Second issue would be the battery life, maybe my tablet is defective but definitely the battery life is shorter on Android than Windows. Tried to recalibrate the battery (which acts quite weirdly on both OS) by booting on Android, wait til it reaches 10-20%, reboot and wait for the tablet to shut down in the boot selection. Then full charge but it didn’t work apparently. That battery inaccuracy is really the biggest fail of this tablet because it performs nicely and the screen is fantastic. Keep up the great work and thank you again.

Camera not working either. <noscript></noscript>

On k9c6 camera works on 100 %.

[mirek]

Tamás wrote:

Hello there!

Thank you Mirek for this awesome rom! I only used Windows since november, but with your rom, I love the new feeling of this android tablet!

I have only two questions:

Is there any way to use the android stock launcher? I dont need the addons of the Apex, and this launcher reloads every widget and button when I go back to the homescreen.

The other question of mine, all of you have the volume up, down and screenshot buttons on the navbar? Can I get rid of it?

Keep up the good work! <noscript></noscript>

ps: Both cameras work here.

In the apex settings check option – keep in memory then will be fine.

Reloading because we have available 2 GB ram so far …

[mirek]

Jean Marc wrote:

Thanks a lot Mirek, I done dirty Flash, everything is fine until now. The speed also is better over Android.

I use Autodesk SketchBook on Android and also on Windows, the drawing on Windows is immediately responding, but over Android there is a delay, it doesn’t register the drawing at the time touching the screen but a little bit later. Over windows it is perfect. Is there any thing I can do for that, any setting maybe?

Thanks again, it is great a job.

J-M.

Ps. By the way I am glade to subscribe at this forum because I didn’t found any direct support from Teclast, other than here?!

The touch response is a bit slower because android works like that.

[Nuno]

Nuno wrote:

Pingus wrote:

Hello, thank you for that great piece of work. I received my x98 pro (so K9C6) few days ago, instantly flashed your rom and it’s really nice. The camera is not working either on the K9C6. Seen your first post saying K9C3 had a camera issue, don’t know if you meant K9C6 has also the issue. Anyway, not a big loss for me. Second issue would be the battery life, maybe my tablet is defective but definitely the battery life is shorter on Android than Windows. Tried to recalibrate the battery (which acts quite weirdly on both OS) by booting on Android, wait til it reaches 10-20%, reboot and wait for the tablet to shut down in the boot selection. Then full charge but it didn’t work apparently. That battery inaccuracy is really the biggest fail of this tablet because it performs nicely and the screen is fantastic. Keep up the great work and thank you again.

Camera not working either. <noscript></noscript>

Now I tried again to use cameras and I can confirm they are working. Maybe some bug at the other day. Sorry about that!

Nuno wrote:

Great job Mirek. Just made a clean install. Everything went smooth and with great results. Many thanks. Has you said before, I know you didn’t have the time to try to solve the Wi-Fi location issue but… any clue about what might be wrong? Are you planning to try to fix it? Many apps use location, like google now, and the only workaround I found was using a fake GPS app… Again, great job!!

About the location issue… Any feedback? Any other workaround?

 

 

[mirek]

Nuno wrote:

<a href=”http://techtablets.com/forum/topic
About the location issue… Any feedback? Any other workaround?

Yes I check that in the next release

[Anonymous]

Did anyone find a different drain from airplane mode to normal mode + wifi mode?

I notice that in airplane mode (so all off) the tablet drain more battery than in normal standby mode with wifi on.

Any advise?

I’m using the last great mirek rom.

Thx to all!

[Tamás]

Interesting, i only have battery drain on windows, with Mirek’s android, its more than perfect! 🙂

[petertrol]

I also have big battery drain in windows instead of Android mirek3.0, any special advise to increase it please?

[Milen]

Hello, new here, love the V3.0 ROM. I have a couple of questions for whoever can answer them. I am trying to run a different launcher in mireks ROM but apex seems to be the default and cannot be removed.  Is there any way to acomlish this.  I have had minor success with nova but would really like to run google now launcher and it seems impossible.  Also, I got a microSD card, 64gb, when I try to mount it in mireks ROM the tablet tries for 30secs and reboots.  The card is xFAT formatted and works fine when I boot in windows.  Anyway, thanks in advance guys.

 

[Author]

Posts