You don't need a thermal mod to solve the heatsock overheating issue

[Nero]

Hi guys. Its been a while since I visited the page. I’ve realized many guys are screwing up their devices and they are trying to sort out a software issue. The overheating issue I guess is caused by turbo power(whatever that is) as it tries to over clock the processor (not sure about all there jargon)… In the battery settings go to advanced option and adjust the processor power from 100% to any figure below it. Be sure the turbo will be switched off. U can even go below 50% which will immensely interfere with your device performance … This worked for me coz am located in Kenya and I’m very sure that the tax man here won’t spare the aluminium mod when I import it.

 

I hope this helps

[Algorithm]

I think its a better idea to adjust the TCC Activation offset in the bios which will start throttling from the temperature value (100c-temperature value).  Setting it to 20 for example will start throttling from 80c.  This will still approximately give you higher speeds than non turbo boost on average.

To disable turboboost you would set 99% in max processor power, but this would then default to 1.0ghz max base speed (or is it 1.6hz)   setting it to 50 will give you cherry trail atom performance and probably better to just use an atom tablet instead

 

[Author]

Posts