[Ali Baha’a]

hi gil,

For the windows 10 x64, you can use the Media Creation Tool for windows 10 :

1. install it in any desktop pc or labtop.
2. chose”create installation media for another pc” then next.
3. chose your language, edition, architecure then next.
4. chose “usb flash drive” then next.
5. wait till create your bootable usb

and for the option to boot from usb in the bios config, please read my last post carefully and do step by step them to find this option in bios.

thanks

[Ali Baha’a]

hi gil,

i supposed you already did a bootable usb key, then you must change the booting device priority in the bios to usb in the first place:

1. Power Off your tablet completely. [Start]–>[Shutdown].
2. Insert your bootable USB Drive.
3. Power On your tablet.
4. press DEL key BEFORE or at the time of appearing the Logo (american megatrends or CUBE or the chinesse name) this will enter you to bios configuration screen.
5. go to Boot tab in the bios.
6. then change the 1st bootable device priority to USB FLASH.
7. press F4 to save the changes with confirmation with YES.
8. the tablet will reboot to your USB flash directly.

regards

[Ali Baha’a]

Chris G wrote:

Have you tried restoring my doubledriver dumb in the downloads section? Download doubledriver and then restore my dump and see if it works out for you.

hi, thank you for your replay.
i found the solution of the problem, its from a bad version of Windows 8 that i used, so i redownload the Windows 8 from the site of microsoft, install it, activate it with my pro key, let all update to finished to finished at the Windows 8.1 pro then install the Windows 8.1 drivers (from xda forum) and at that moment all the tablet fonctionalities return to normal.
but again thank you for your advise.

[Author]

Posts