[David]

The Android partition sizes come on gpt.bin file, and this file on original image should fill entire ROM space.
You can use this official guide making steps I and II.

[David]

The best option is reflashing Remix OS via DNX mode.
The image that is on official forum think that he occupies all the capacity of the tablet, since it is the same which has been installed the Vi10 Plus.
If you want to do a factory reset with Remix OS and Windows, that is more laborious 😀

[David]

Chris G wrote:

So no palm rejection? IIs it the HiPen H2? Still not sure if I should review this one or not, I do like 3:2 displays. Does the type-c port work at USB 3.0 speeds?

Sorry for the delay in responding.
Yes, I have the original HiPen H2 stylus.
Yes it has palm rejection, but the stylus is very bad. It has no pressure sensitivity points apart from pressed or not pressed. Something better a driver updated on the official Forum, but leaves a lot to be desired.
Yes, the Type C USB is USB 3.0.

I chose this tablet because I thought that I had everything I needed (4GB RAM, 64GB storage, Format 3:2, at least full HD and stylus). If you get to know the functioning of the stylus I had not bought it.

So my recommendation is that if do not want stylus and tablets of 9.7 format you like but you want it larger without go to the Chuwi Hi12, it is very good tablet, especially to read comics.

[David]

Bad. Now is just like a capacitive pen without pressure and hands suppression, i am very disappointed.

[David]

Have you perform a fresh install of Windows 10? 🙂

To improve touch response:

• Make backup from %WINDIR%\INF\TouchSetting.gt
• Open file and replace content with (or use attachment file)

[Setting]
;UpdateCFG=1
SendCFG=1  ;Send CFG to touch IC when loading driver
SleepDisable=1
PhysicalXsize=1485;Physical size,the unit is 0.1mm
PhysicalYsize=1976

[Support]
ESD=1  ;Driver supports ESD recovery processing
;SensorID=0 ;According to the different SensorID send different configuration
GtpTool=0 ;GuitarTestPlateform tool support
X2X=1
Y2Y=1
X2Y=0
Log=0

[Feature]
Pen=0  ;stylus/pen support
NumberOfKey=0 ;The total number of keys supported,equal to 0 does not support key
Key1=0xe3 ;0xe3 is home key,Must be a hexadecimal number
Key2=
Key3=
Key4=

[CFG]
DefaultCFG=0x00,0x00,0x06,0x00,0x08,0x0A,0x35,0x00,0x01,0xC8,0x28,0x08,0x5A,0x46,0x03,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x1A,0x1E,0x14,0x90,0x30,0xAA,0x1D,0x1F,0x29,0x1C,0x00,0x00,0x00,0xA2,0x33,0x2D,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x0F,0x28,0x94,0xC8,0x02,0x08,0x00,0x00,0x04,0xAC,0x10,0x00,0x97,0x14,0x00,0x8A,0x18,0x00,0x80,0x1D,0x00,0x77,0x24,0x00,0x78,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x19,0x3C,0x2D,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x05,0x06,0x07,0x08,0x09,0x0C,0x0D,0x0E,0x0F,0x10,0x11,0x14,0x15,0x16,0x17,0x18,0x19,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x04,0x06,0x07,0x08,0x0A,0x0C,0x0D,0x0E,0x0F,0x10,0x11,0x12,0x13,0x14,0x19,0x1B,0x1C,0x1E,0x1F,0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,0x29,0x2A,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x01
senserid_0=
senserid_1=
senserid_2=
senserid_3=
senserid_4=
senserid_5=

• Reboot
• Test the touch. Would has it improve.

Attachments:

You must be logged in to view attached files.

[Author]

Posts