[Franz]

Hello Again!

Below you will find the download link for the drivers.

https://drive.google.com/file/d/0B0h2YgTDMxCWMFlYSDBBcnE4WWs/view?usp=sharing

This .zip also includes the program to do the restore process.

 

Have fun and don’t throw the tablet away 😉

[Franz]

Hello Guys!

“Warm” greetings from Austria.

A small TUT how you reinstall Android and Windows:

Download the files from the Mega link – Download all the required files, like the latest Android, the phoneflashtool and if you want you can also download the WinPE + the Win10_RS1. ( I would suggest to take jdownloader, otherwise it will take a long time. I would also suggest do grab the WinPE.zip file, because it was not possible for me to download the whole folder.)

First of all, you have to install Android, otherwise the bootloader will not work –  For this do the following:

Install and open the Phoneflashtool. (for me I also installed the Driver called iSocUSbdriver, but this one is also included in the Phoneflashtool setup)

Extract the android.rar file in one folder. Now bring your tablet in the fastboot mode. (Switch it on, till you see the logo and press the vol+ and vol- button – You will get an info and you can release the buttons – A yellow font should appear.)

Now the tablet should appear in the phoneflashtool program. Click here on browse, search for the android folder, and select the flash.json file.
Change the Configuration to “blank”
Press the “Flash” button and wait till the process is finished.
Now it is really important to start android first, before you continue. (It will take some time)

———- Official way———
After this, take a cardreader or an USB hub where you can insert two cards, or two usb sticks.
Format one as FAT32 and the second as NTFS (this one must be renamed to WINPE).
On the FAT32 one, paste here all files from the WINPE folder.
On the NTFS one, create a folder called “images” and paste here all files from the win10_RS1 folder.
Connect the Hub to the tablet and boot it. If you can not see the windows logo in the boot menu / or you have no access to the menu, you have to change the boot order (under “BOOT”) to 1 Windows boot loader, 2 UEFI, 3 Android. Additionally you have to activate under “BOOT” the fast boot mode (Enable) + the USB support to “FULL INITIAL” otherwise it will not be possible to boot from the USB stick.

(If you do not know how to enter the BIOS – Start the tablet and press the “ESC” Button)

Now it should be possible to choose between android and Windows, you have to take windows. The system will boot from the Stick and it will automatically install windows.
After this steps you will get a fu**ing (sorry 😉 ) chinese version on your tablet and the best thing is it was not possible for me to install an german language pack or an english one 😉
————————————

So I thought, I might “skip” the offical way and create an USB stick with the RUFUS methode (You will find the TUT on page 4!)
It also worked for me, with a huge problem. I could not calibrate the touchscreen, and it was not possible to work with it. I don’t know why, maybe the official windows drivers are not made for this “crap” device ;). I also found a driver package on other websites, but even here the gyro sensor always rotated my screen.

So I did the following:

I took the official way and installed the chinese version. Then I downloaded a program (like DriverBackup!) to backup all drivers . I copied all drivers on a usb stick, and installed windows again (with the rufus method)
After this, I restored the drivers from the Backup AND Tada now the touchscreen works, the question is how long 😉

If you have the same problem here, let me know,  then I will upload this package.

What is my Resume here? Save your money and buy a “good” tablet where you find a lot of TUT’s 🙂

[Author]

Posts