[Luca]

Chris G wrote:

That is odd, so it doesn’t see your disk at all? Did you mess around with the bios settings?

I solved this problem! I was able to do from the image directly from acronis program without having to create a bootable flash drive. now the problem of the whistle seems to have disappeared when the battery is charging, but as soon get to about 80%, the whistle back returns, more slightly. if I keep the brightness to a minimum, however, it disappears.

again thanks for the support!

[Luca]

Chris G wrote:

Luca wrote:

Chris G wrote:

Luca wrote:

hi! thanks for the drivers, but after i had install all the drivers i feel a terrible noise like a high frequency whistle. The whistle increases with increasing screen brightness. How can i do? thanks

Same thing happened to me, turns out a clean install wasn’t a good idea. (Still no working camera and a drive issue in device manager) Lucky I have a Acronis stock image backed up before I wiped and did the clean install. Uploading it now, this saved me and I was able to restore my EZbook 2. That noise was driving me insane…

thanks a lot of response. and how can I do to fix this problem? it’s a terrible noise and with this i can’t use the device.

Fix is here, http://techtablets.com/2016/07/jumper-ezbook-2-windows-10-image-restore-ezbook-2-factory/ it’s the only way till Jumper give us a proper windows 10 WINPE image.

very thanks! but i never  used acronis! i read the .txt but when i created a bootable usb and i entered in the bios and i am in the acronis programs, acronis doesn’t see my disk, 64emc! how can i do?

Attachments:

You must be logged in to view attached files.

[Luca]

Chris G wrote:

Luca wrote:

hi! thanks for the drivers, but after i had install all the drivers i feel a terrible noise like a high frequency whistle. The whistle increases with increasing screen brightness. How can i do? thanks

Same thing happened to me, turns out a clean install wasn’t a good idea. (Still no working camera and a drive issue in device manager) Lucky I have a Acronis stock image backed up before I wiped and did the clean install. Uploading it now, this saved me and I was able to restore my EZbook 2. That noise was driving me insane…

thanks a lot of response. and how can I do to fix this problem? it’s a terrible noise and with this i can’t use the device.

[Luca]

hi! thanks for the drivers, but after i had install all the drivers i feel a terrible noise like a high frequency whistle. The whistle increases with increasing screen brightness. How can i do? thanks

[Author]

Posts