NickyP replied to the topic Windows 10 Upgrade/Clean installation guide for dummies! in the forum Chuwi Hi8 Discussion 9 months ago
Hi, Many thanks for your hard work and guidance! I have a Chuwi Hi8 Pro. I generally followed your clean installation guide with a few differences and managed to succesfully clean install the latest version of Windows (April 2018 version 1803). I had removed Android beforehand for space reasons, but when I tried to install the 1803 “upgrade” it…[Read more]
I bought a goldenfir 128gb 2242 drive from ali express because it was cheap and was the right size. Worked great for one week – now it’s not recognized in the BIOS. It was failing sometimes to boot after only a few days (booted into a shell command system) – but usually a reboot worked – until now. After working on something all afternoon and…[Read more]
It was not touchpad blocker causing this problem -the problem came back.
However after more research, this is working, thanks to Philip Tory http://www.tomsguide.com/answers/id-3226598/acer-aspire-shut-completely.html
1. Type Control Panel in the search box.
2. Click “Control Panel”.
3. Click “Power Options” (the view mode should be small…[Read more]
Thanks …but no the ssd is hardly one third used. I have found the culprit I think…I turned off the pad blocker software and the problem goes away. Turning it back on causes the problem to return. I will report back in a day or two to confirm this was the cause of my problem. Thanks !!
I recently installed a M2 224 128gb SSD (Goldenfir). I then cloned the eMMC to the SSD and altered the BIOS to boot from the new SSD.
Everything works great except around 50% of the time after shutting down the blue light will not go out. It’s almost as if the software shuts down too quickly in advance of the hardware.
Normal operation this is…[Read more]