[Antonio]

The version installed after the windows  recovery is the 1607 build 14393.5 (photo attached).  Which is the original version without reinstall?

Attachments:

You must be logged in to view attached files.

[Antonio]

小熊 wrote:

Hi Antonio, Unfortunately you are out of kuck with that Windows Version. No change possible since it a single language version. U would actually need to install another windows…. that should be forfree available. That means u eed to build ir own install version and probably need a license. Last friday i became aware of the service wechat account. They will be bacl by tomorrow, i promise u I will annoy them to out an english version online, but i somehow doubt they will do that…

when I received I was in English and I had no trouble installing the Italian language pack. but it has happened to you after a fresh install?

[Antonio]

I’ve downloaded from Baidu and managed to reset the tablet. But I can not change the Chinese language to English (or Italian). I tried using the settings menu but it does not work. please help

[Antonio]

jap wrote:

Antonio wrote:

EUREKA!!!!! My tbook 16 power revive

How did you do that? Which protocol did you follow? Help, please!

I downloaded from Baidu with Jdownloader WINPE_ (U) .zip. Probably the one downloaded from mega.nz has a few bugs. Follow my instructions a few posts back. The image  downloaded from mega is ok. Must be in a folder \ images \ the second usb drive. Good luck

[Antonio]

EUREKA!!!!! My tbook 16 power revive

[Antonio]

Dmitry Kovalenko wrote:

When You’re copying Windows image to second USB-card (win 10 rs 1) place everything in folder /images/..

<span id=”result_box” class=”” lang=”en”><span class=””>1</span>) I created FAT32 usb drive, label WINPE and I’ve copied files and folders extracted from WINPE_ (U) .zip.
2) I created NTFS usb drive, label WINPE and copied in the \ images \ 7 files extracts from Win10_RS1 (images).
3) I inserted the two drives in the USB HUB usb and I set up the system.<span class=””>4</span>) I select (photo 1) the windows logo.
5) The system reboots and displays photos 2.

how can I go on?</span>

Attachments:

You must be logged in to view attached files.

[Antonio]

Wyg Events wrote:

Had so many problems installing Win10 on this tablet. The method with 2 USB sticks, didn’t work at all….and downloading the packages was a pain. You need a USB hub for connecting Keyboard, Mouse and bootable USB stick. So this is my solution:

1. Flash the tablet clean for Android, make sure is working ok
2. Get a Win 10 iso (i used win 10 pro).
3. Use Rufus to create an USB bootable stick, containing the above image. The stick has to be formatted FAT32 and GPT partition scheme for UEFI!
4. Power Off the tablet and plug in the bootable stick
5. Power ON the tablet, and it should boot in to dual boot screen.
6. Select Windows to boot into, and you should see the normal win 10 setup screen.
7. In Win 10 setup, go and select CUSTOM INSTALL, a window will appear with the available drives and partitions.
8. Scroll down and select the Unpartitioned Space. The size of it should be around 32 GB. Press Install, and normal Win 10 install procedures will start.
9. Follow all the procedures for Win 10 installation….the device will restart 2-3 times, at the end you will have an working win 10 but without drivers.
10. Now you will need an working Android phone that can tether and share his internet connection over USB.
11. Use a usb cable to connect your phone to the USB 3.0 port of your tablet, after that, on your phone turn ON USB tethering; you should see on your tablet that a network driver is being installed.
12. On your tablet, open internet explorer or edge, and check if you have internet connection….if all OK, then:
13. On your table, open Device Manager, and click on all the devices found that do not have drivers (the ones marked with yellow), select Update driver and then ” Search Automatically for an updated driver”.
14. You should see progress for downloading and installing drivers.
15. Repeat step 14 for every device.
16. After you found all drivers, go and download “Intel Driver Update Utility” and run it, it will tell you that it found new drivers for the video card, select only the second one and install it.
17. Reboot
18. Done….

If you have issues, go again in Device manager and repeat step 13. By now you should have WiFi so no phone need. You need a USB hub for connecting Keyboard, Mouse and bootable USB stick. Good Luck

Hi,

After flash Android with Intel Flash Tools my dual boot screen show only Androi option. Can I solve? Can I install (flash) only dual boot option?

 

 

[Antonio]

JAMBOU Regis wrote:

Carlos, If you crash all…The best procedure in english for the android part is https://techtablets.com/forum/topic/guide-teclast-x16-pro-power-factory-reset/il

 

This link don’t work.  Why?

[Antonio]

During OTA update Android crashed. Same problem to me!!!

[Author]

Posts