128 GB SD card not recognised in Windows 10 Home

128 GB SD card not recognised in Windows 10 Home

TechTablets › Forums › Teclast Forums › X98 Plus Discussion › 128 GB SD card not recognised in Windows 10 Home

Tagged: 

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 19, 2016 at 11:22 am #34251
    Jacques
    Participant
    • Posts: 20

    Just replaced my 32 GB SD card by a 128 GB.

    The 32 GB card is properly detected by Windows 10, but not the 128 GB

    (Not visible in “Windows Disk manager”)

    I tried to reinstall the SD card driver from Teclast, but same issue.

    The same 128 GB SD card is properly detected on my Laptop using Windows 10 as well.

    No problem when booting Android; the 128 GB is properly recognised

    (NTFS formated )

     

    April 19, 2016 at 11:57 am #34255
    CpA
    Participant
    • Posts: 140

    Welcome to the Jungle

    http://techtablets.com/forum/topic/reading-sdxc-card/

    April 19, 2016 at 12:43 pm #34260
    Jacques
    Participant
    • Posts: 20

    Ok, just to sumarize:

    As my 128 GB SD card (formated in “NTFS” on my Laptop running Windows 10) is properly recognized and works fine when I boot on “Android”, I belive I can exclude any hardware compatibility problem between this 128 GB SD card and the Teclast X98 Plus (dual-boot version with Android 5,1 and Windows 10 Home edition), I believe there is a “Windows 10” driver issue.

     

     

     

     

    April 21, 2016 at 1:19 am #34524
    fztt
    Participant
    • Posts: 13

    Mine is a6c7, working for both windows & android up to mirek v2.1, after flashing mirek v3, no longer detected in windows.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar