2.7 bios from wootever - remixos - UPDATED

This topic has 26 replies, 10 voices, and was last updated 9 years, 4 months ago by BoORD_L.

Viewing 15 posts - 1 through 15 (of 26 total)

1 2 →

Author

Posts
December 14, 2016 at 4:04 pm #58632
Dean
Participant
- Posts: 63
I have been waiting for this forever thanks!
December 15, 2016 at 7:07 pm #58746
BoORD_L
Participant
- Posts: 290
wootever has just update his bios to solve a problem.

Same link in the first post

What I've used and what I've got:
TECLAST X98 AIR 3G, TECLAST X98 AIR II, TECLAST X98 PRO,CHUWI HI8, CHUWI HI12, CUBE I9
December 16, 2016 at 9:08 pm #58799
anubis
Participant
- Posts: 7
looking good! thanks for sharing mate
December 17, 2016 at 3:47 am #58809
BoORD_L
Participant
- Posts: 290
welcome mate 😉

If someone need a different splashscreen i could change it for you.

just post the desired image

What I've used and what I've got:
TECLAST X98 AIR 3G, TECLAST X98 AIR II, TECLAST X98 PRO,CHUWI HI8, CHUWI HI12, CUBE I9
December 31, 2016 at 10:03 am #59561
DicedPixel
Participant
- Posts: 8
BoORD_L, what is the correct procedure to update the bios on the Cube i9 ?

I have the original bios backup, the 2.6 and the 2.7 version one you posted.

But I have read that if you click in the update window, during the update, you will brick it, and no file will be updated. With or without the keyboard.

Also that the screen will go dark during the update and you just have to press Y at least 3 times ?

So, any advice when I run the bios flash exe so I would not brick the tablet ?

Thank you for your help,

Cristian
January 1, 2017 at 6:00 am #59606
BoORD_L
Participant
- Posts: 290
Decompress the file to a folder and execute “Flash.cmd” as administrator (right click on it)

Use a keyboard and a mouse during update to enter “y” when asked because touch screen will be disabled.

If command prompt looses focus the procedure will stop (or better freeze) till it gains focus back.

You can execute the bios update again if something goes wrong. just don’t reboot system if the procedure doesn’t reach its end.

use latest bios (stock or modded).

any further question?

What I've used and what I've got:
TECLAST X98 AIR 3G, TECLAST X98 AIR II, TECLAST X98 PRO,CHUWI HI8, CHUWI HI12, CUBE I9
January 1, 2017 at 11:39 am #59633
DicedPixel
Participant
- Posts: 8
Thank you for the help. Will report about how it went when the tablet reaches me.

Cristian
January 1, 2017 at 5:13 pm #59643
BoORD_L
Participant
- Posts: 290
are you planning to apply thermal mod?

if not i don’t know if that bios makes any difference

What I've used and what I've got:
TECLAST X98 AIR 3G, TECLAST X98 AIR II, TECLAST X98 PRO,CHUWI HI8, CHUWI HI12, CUBE I9
January 2, 2017 at 11:27 am #59674
DicedPixel
Participant
- Posts: 8
Yes, I will apply the thermal mod. I have all I need from when I was doing watercooling mods on video cards. ( 20×20 shims, thermal adhesive, proper thermal pads, cleaner and paste. ) Now I am glad I kept them.
January 2, 2017 at 12:29 pm #59676
BoORD_L
Participant
- Posts: 290
nice ?

What I've used and what I've got:
TECLAST X98 AIR 3G, TECLAST X98 AIR II, TECLAST X98 PRO,CHUWI HI8, CHUWI HI12, CUBE I9
January 2, 2017 at 4:31 pm #59693
Bartomeu
Participant
- Posts: 2
Hello, I just bought a cube i9, which bios recommend me to use with windows 10 ?, carries the original 2.4.
Thank you.
January 2, 2017 at 6:36 pm #59696
BoORD_L
Participant
- Posts: 290
BoORD_L wrote:

are you planning to apply thermal mod? if not i don’t know if that bios makes any difference

What I've used and what I've got:
TECLAST X98 AIR 3G, TECLAST X98 AIR II, TECLAST X98 PRO,CHUWI HI8, CHUWI HI12, CUBE I9
January 2, 2017 at 10:26 pm #59708
Bartomeu
Participant
- Posts: 2
BoORD_L wrote:

BoORD_L wrote:

are you planning to apply thermal mod? if not i don’t know if that bios makes any difference

Yes, i’m waiting for the materials for the thermal mod. Thks.
January 3, 2017 at 12:29 am #59713
BoORD_L
Participant
- Posts: 290
then modded 2.7 bios

if you need a different splash screen just post your picture and i’ll mod wootever bios for you.

What I've used and what I've got:
TECLAST X98 AIR 3G, TECLAST X98 AIR II, TECLAST X98 PRO,CHUWI HI8, CHUWI HI12, CUBE I9
January 3, 2017 at 8:51 am #59725
Alex
Participant
- Posts: 8
BoORD_L wrote:

then modded 2.7 bios if you need a different splash screen just post your picture and i’ll mod wootever bios for you.

Which splash screen/logo does the modded 2.7 bios have? I haven’t installed it yet…it would be nice to have the intel logo. 🙂
Author

Posts