Battery Icon Issue and charging m

Battery Icon Issue and charging m

TechTablets › Forums › Teclast Forums › X98 Plus Discussion › Battery Icon Issue and charging m

Tagged: , ,

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • January 4, 2016 at 7:17 pm #21211
    vierconbruyo
    Participant
    • Posts: 6

    Hi!

    I have recently bought a teclast x98 plus. First of all I did a clean installation of windows 10, and then installed all the drivers. Now I am noticing that charging is quite slow (specially with a samsung wire). I use an Aukey charger 5 v – 2,4 A, is this normal? How long  does it take to completely charge?. On the other hand I have noticed when I pressed my battery Icon it displays the % and the word “calculating”. When the tablet is charging after a while it shows the time until it will be fully charged meanwhile when it is not charging it is showing “calculating” and no remaining time is displayed. Again is this normal?

    And more thing, I have noticed that the tablet automatically boots with the “airplane mode” button powered on although actually it is not in airplane mode.

     

    Please let me know if you have experienced same or similar issues.

     

    Thanks in advance!

     

    Kind regards

    January 17, 2016 at 2:57 am #22669
    calhaus
    Participant
    • Posts: 28

    I use a samsung 2A charger and it’s super slow charging.

    Also i’ve noticed if i’m seeing a movie with the charger plugged in, the battery also drops (wtf right?).

    Can you guys tell me how much amperes does the tablet supports for charging?

    (i’ll probably try to find one with 3A out)

     

    Also any software/windows related tips to save battery? Apart from the luminosity

    January 18, 2016 at 9:47 am #22802
    Gal
    Participant
    • Posts: 307

    Cable. I guess the cable is your bottleneck. Which USB cable are you using?

    January 18, 2016 at 9:54 am #22803
    vierconbruyo
    Participant
    • Posts: 6

    I am using wide cables, with a charger of 2.4 A, However I have ordered an usb polimeter in order to make sure how much current does the tablet get. I will tell you my updates. But my guess is that the cable should be short and wide enough to give at least around 2A to the tablet.

     

    January 18, 2016 at 9:56 am #22804
    vierconbruyo
    Participant
    • Posts: 6

    I have also noticed that tablet in sleep mode is consuming around 25 % of battery in 24 hours, Something tells me that CPU is not in real sleep mode, like IOS or Android tablets.

    January 18, 2016 at 10:21 am #22807
    Gal
    Participant
    • Posts: 307

    What is a “wide cable”?  The short cable that came with the tablet should be fine.  If it’s long (1M+) , it needs to be of good quality like the ones that are supplied with western phones (LG GX, Galaxy X etc..).

    March 19, 2016 at 1:01 am #29994
    ahmet tezcan
    Participant
    • Posts: 1

    I have the same problem too.
    Have a solution to this problem?

    March 19, 2016 at 4:24 pm #30055
    Peter
    Participant
    • Posts: 101

    Hi,

    You might want to read trough this topic to find some answers:

    http://techtablets.com/forum/topic/otg-hub-or-adapter-that-works-with-the-x98-plus/

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar