TechTablets › Forums › Cube Forums › Cube iWork10 Ultimate › Buy rev1 or Rev2?
- This topic has 6 replies, 4 voices, and was last updated 10 years ago by
Siu Lay.
-
AuthorPosts
-
July 21, 2016 at 7:36 pm #44127
Anonymous
Inactive- Posts: 51
Hi
Had the rev1 of this tablet before, but had to send it back because it died, got a refund and have been looking around a bit what to order, but i keep getting back to this tablet because of the pricing compared to the spec and build quality.
So, anyone else share Hans complaints in the other thread? Or was he unlucky with his tablet?
I’m thinking about ordering this tablet in Rev2 (still have the keyboard and tampered glass)
Don’t buy the USB-c version (rev2). I have it and it’s scam, compare to the rev1 version:
- no USB 3.0 (the usb-c port is usb 2.0 wired). Already asked at gearbest and they confirmed it: http://i.imgur.com/c3IzkEV.png (what a joke)
- slow charge, it just charges “fast” if it’s powered off then it takes about 5hours to charge from 0 to 100%
- usb-c port cant give enough power to power it while it’s on, it alway goes back to 98% then charges to 100%, stays a bit, and charges again, in a loop. This just happens if you use the device a “bit” for example watching a movie or watch twitch.tv at source. or just test it with prime95
- DDR3 instead of DDR3L, this is bad because it drains way more power, but also means more heat, and unstable at higher speeds. thatfor it’s set to 1066MHz.
- DDR3 is clocked at 1066MHz instead of 1600MHz, which is a huge speed loss. Tried to set it to 1600MHz resulting in random reboots and app force closes (both Windows and Android).
- cheap and slow Toshiba/Hynix eMMC, 30-50% slower than the Samsung MMC in rev1. The Toshiba has around 30MB/s write speed, where Samsung one has 77MB/s
- So far had lots of bluescreens, mostly related to the Realtek Wifi driver, also had some freezes yet in Windows while sticking in a USB pen
Samsung eMMC:
http://techtablets.com/wp-content/uploads/2016/03/eMMC-speeds-300×272.pngHynix eMMC:
http://i.imgur.com/eAD98oV.pngToshiba eMMC:
http://i.imgur.com/tmTmjPY.pngJuly 21, 2016 at 9:59 pm #44137Decide on your own I guess? If those things I mentioned up there are irrelevant to you, then buy rev2, if not, but rev1 or other tablet.
July 22, 2016 at 6:34 am #44164Anonymous
Inactive- Posts: 51
Just curios if everyone with Rev2 experience the same things as you did.
July 22, 2016 at 3:10 pm #44206Mine runs fine and I don’t have any issues, but I do wish I’d gotten the version with the full sized USB3 port. I don’t own any type-c devices. I wanted the faster charging and since it doesn’t really do that and I don’t have the devices to use it, it’s a waste for me. You combine that with the fact that a bunch of the internals on the rev1 are faster, like the RAM and Storage, and it makes more sense to have rev 1 for me. Live and learn.
July 22, 2016 at 3:19 pm #44209I will pick non-C. Because it is not a true “type c” connection, charging is VERY slow
July 22, 2016 at 4:45 pm #44214Anonymous
Inactive- Posts: 51
Charging was very slow on the rev1 I had as well. U experienced the same things Hans did with your tablet?
July 22, 2016 at 5:27 pm #44217I am comparing to real type c device. Charging is slow on this tablet period. However, this tablet does not have a real type c connector, it is basically a type C to micro USB converter. As a result of its charge is SLOW and is not comparable to a real type c device. So basically the type c connector is only for show and does not have any benefit.
-
AuthorPosts
- You must be logged in to reply to this topic.

