Chuwi HI10 SD Card problem

Chuwi HI10 SD Card problem

TechTablets › Forums › Chuwi Forums › Chuwi Hi10 Discussion › Chuwi HI10 SD Card problem

Tagged: 

  • This topic has 31 replies, 18 voices, and was last updated 8 years ago by Dave.
Viewing 15 posts - 1 through 15 (of 31 total)
1 2 3
  • Author
    Posts
  • January 10, 2016 at 1:43 pm #21768
    Ciro
    Participant
    • Posts: 21

    I have the same problem!

    January 10, 2016 at 2:56 pm #21777
    Hristo Ivanov
    Participant
    • Posts: 6

    Me too. Recognizes only one old card 8 GB, Class 2. Samples in all formats 2 SDHC cards and always I get error code 10. Here in this forum I found a temporary solution: http://bbs.chuwi.com/forum.php?mod=viewthread&tid=1908&extra=page%3D1%26filter%3Dtypeid%26typeid%3D63

    January 10, 2016 at 5:37 pm #21827
    Ciro
    Participant
    • Posts: 21

    Could you write here the solution in English please?

    I have 64 Gb class 10 microsd.

    I have also 8 Gb and I have not problems with this one.

    January 10, 2016 at 7:06 pm #21844
    stéphane
    Participant
    • Posts: 18

    Well the problem is already known a solution will soon be readily available

    January 11, 2016 at 3:48 am #21865
    Enzo
    Participant
    • Posts: 1

    I have a similar issue. The tablet refuses to accept my Samsung 64GB Class I SDXC card.

    Plopped in an old Strontium 32GB Class 10 SDHC card and it detects it in less than a second.

    No problems reading either cards on my PC.

    Could this just be a simple driver issue?

    My Hi10 actually detects the 64GB card as SD storage, but just doesn’t recognize it as an actual storage volume.

    January 11, 2016 at 4:05 pm #21917
    kurai
    Participant
    • Posts: 42

    Perhaps an issue with the exFat format, rather than hardware ? Is the exfat driver service present and started ? Any errors relating to it in Event Log ?

    January 14, 2016 at 8:26 pm #22353
    Ciro
    Participant
    • Posts: 21

    Any news?

    January 16, 2016 at 2:02 pm #22551
    Hristo Ivanov
    Participant
    • Posts: 6

    There is a solution. An updated version of BIOS from 605 to 607 and already discovered my 64 GB card. I did a test with h2testw: writing – 24 mb/s, reading – 47 mb/s.

    January 16, 2016 at 6:14 pm #22573
    Mark stainsby
    Participant
    • Posts: 16

    @hristo where did you get the 607 bios file from? Do you have a link?

    thanks

    January 16, 2016 at 6:18 pm #22574
    Hristo Ivanov
    Participant
    • Posts: 6

    From here.

    Attachments:
    You must be logged in to view attached files.
    January 17, 2016 at 7:27 pm #22768
    Mark stainsby
    Participant
    • Posts: 16

    @hristo i dont see the 607 bios file at that page.. i have looked in the folders and i cant see it?

    could you link directly to the file?

    cheers

    January 17, 2016 at 7:54 pm #22771
    Hristo Ivanov
    Participant
    • Posts: 6

    https://drive.google.com/folderview?id=0B7UJF0mw6LjJaExLQl9wRG9WVHM&usp=sharing

    January 17, 2016 at 7:56 pm #22772
    Hristo Ivanov
    Participant
    • Posts: 6

    The file P02-C106_B101UAN_607

    January 18, 2016 at 10:12 am #22806
    stéphane
    Participant
    • Posts: 18

    Thank you for the tip, I just flash the bios and my lexar to 64GB been recognized on.

    Read 90MB, write 45MB

    January 18, 2016 at 10:42 am #22809
    Totac
    Participant
    • Posts: 2

    Hi there,

    i have the SD-Card Problem too. Can somebody give me Instructions on updating bios in my Hi10?
    Currently i have Bios version:C106_B101UAN.606 and would like to update to P02-C106_B101UAN_607

    My Hi10 has one blue USB port. (don’t know if that helps)

    i am new to windows 10 Tablets :-S

    Thanks

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 31 total)
1 2 3
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar