TechTablets › Forums › Jumper Discussion › EZBook series › EZBook 3 Pro – M.2 hatch screw
- This topic has 14 replies, 1 voice, and was last updated 4 years, 3 months ago by Wan.
-
AuthorPosts
-
February 16, 2018 at 6:30 pm #79545
Hello,
I lost the screw wich close the M.2 hatch. What is its dimension? Do you know where I can buy a new one?
The offical store on AliExpress don’t have it.Thank you!
February 17, 2018 at 1:03 am #79551I just tested to see if it fit. I don’t know the exact dimension, but the screw that came with my ssd m.2 kingspec was almost the same size (1mm) longer then the original, but it fitted perfectl
February 17, 2018 at 2:59 pm #79555I just tested to see if it fit. I don’t know the exact dimension, but the screw that came with my ssd m.2 kingspec was almost the same size (1mm) longer then the original, but it fitted perfectl
I lost the screw in the left corner of the back cover. I used the ssd screw too, but also for me it is too long for 1mm. I hope someone can help us.
May 20, 2018 at 12:57 pm #143178the screws disappeared
compatible screws ???
May 20, 2018 at 11:23 pm #143189you guys are so screwed….
just take one , measure with a caliper and go to a hardware store, or take a sample with you.
been there, done that, found them after a longer searchsizes vary depending model and version.
if your hardware store has none go to a mobile phone repair guy
Need Help?
1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooksJune 20, 2018 at 3:01 pm #144037I found it.
FH 2.0mm*3.0mm&3.5 mm Conical nut surface with CD pattern
November 5, 2018 at 1:30 am #147895I found it. FH 2.0mm*3.0mm&3.5 mm Conical nut surface with CD pattern
is this for the outside screw? you managed to buy some?
Attachments:
You must be logged in to view attached files.November 7, 2018 at 6:22 pm #147964yes , you go into a screw store and buy a screw.
you also can use a hot glue gun and put bit pf glue in it.
easy to remove if you have to but holds flap or lid in place.Need Help?
1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooksNovember 8, 2018 at 12:25 am #147986thanks. got me some screws from ebay, nothing available near me. argh.
those posts on battery problems helped a lot too. looks like i got a bad one too and i’ll just take it out before i screw down the laptop.
lesson learned.
November 10, 2018 at 4:03 pm #148055well, glad you are no longer screwed, lev
Need Help?
1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooksDecember 19, 2018 at 3:59 pm #149280do you have a link for the screws guys?
ive managed to lose every screw for the back plate lol
i placed them safely away to repair the battery and they have gone missing 🙁
December 19, 2018 at 7:56 pm #149286oh boy, you a major screwed.
a thin cut stripe of silver ductape around the case might do the trick until new screws arrive.
also a hot glue gun might be of some temporary help.been there, done that, works.
Need Help?
1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooksJanuary 5, 2019 at 2:03 am #149743still cant find the type of screws i need, any link that people got?
needs to be something bettr than glueing it or using tape
January 6, 2019 at 2:12 pm #149826a nail maybe? or just google, the dimension you need are above.
Type them into ebay or ali and you shall findI found mine at Leroy Merlin what is a major hardware store in our area, they had all kind of 2mm screws and 1.8mm and even smaller
double sided tape inside the lid frame does the trick also
Need Help?
1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooksFebruary 14, 2020 at 12:48 pm #182710Sorry fot the post one year later, but I hope I’ll help someone
My screws got ruined so I decided to buy new ones. The hardware stores in my city don’t have little screws such these,
so I bought these: ALIEXPRESS
Just perfect
M2 x 3mm (length) [with flat head]Note that you can also use screws form a dead laptop, probably some are good
-
AuthorPosts
- You must be logged in to reply to this topic.