EZBook 3 pro wont Boot

[Chupa]

try to boot from usb then check the emmc

Need Help?
1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooks

[Roland]

Thanks for your help.

I will try that.

[Chupa]

and, did it work?

Need Help?
1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooks

[Nick]

I have the same exact problem! I haven’t changed anything, not updated anything/installed, and was working perfectly fine with no problems! When i opened it the next day it could’t boot into windows, only in the repair/service blue area of windows 10, which i couldn’t find a solution and couldn’t be repaired no matter what i’ve tried.

Although i found a solution, but it’s a bit unorthodox…

I can’t press anything when the laptop firstly boots but rather wait until the repair/service area to appear with the windows 10 options. Then i choose the repair with UEFI bios, the laptop restarts, then i can press del or esc to enter bios. In the boot options there are two Windows boot manager and one UEFI.

The eMMC has disappeared, so i just select the first boot with Windows boot manager then the second the UEFI and hit save & exit.

Then the laptop bypasses the repair area, and opens in Windows 10 normally like before.

Anyone knows what happened? I haven’t touched anything, and i had no problems so far…It just happened very unexpectedly!

Is there a solution for this?

[Chupa]

new win 10 installation is your best bet

Need Help?
1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooks

[Nick]

Why the eMMC disappeared? From the first boot i disabled the windows updates from services and since then was working perfectly with no issues, and one day this happened…

I’m really frustrated, and still waiting for the battery to replace lol…

[Chupa]

it is a cheap Chinese computer, you got a crappy model, fix it or sell it and but something better.
I have the superior Jumper 3S what had very little demand (plastic not aluminum), so these were manufactured “normal”.
The Jumper 3 pro was in high demand, was 8 times or more modified. It also was a model where every penny was cut to meet demand on prices from gearbest etc. The result you have in your hand.

Need Help?
1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooks

[Roland]

I did not try to boot from an USB-stick yet as I dont have a bootable USB-stick.

Instead I tried a SSD ( I think it was a WD green), but it was not recognized in Bios either.

I`m using another Laptop for now, but I will try it with a USB stick once when I have enough time.

[julia roberts]

I saw a forum post about “simple slots for tired brains” and fired up Starburst. With a worldwide user base in mind, the lobby felt clean on my phone tether. I set tiny stakes, no turbo, podcast humming. Halfway through the mellow grind I added spinsala to my tracker to repeat the timing. A crisp wild line landed and paid for groceries. Nothing flashy; just steady spins, calm nerves, and the rare thrill of closing the tab on schedule.

[Author]

Posts