finally it is coming… what now?

finally it is coming… what now?

TechTablets Forums Chuwi Forums Chuwi Hi12 Forum finally it is coming… what now?

Viewing 15 posts - 1 through 15 (of 18 total)
  • Author
    Posts
  • #40420
    alessandro
    Participant
    • Posts: 123

    this evening I will finally have my hi12.

    my plan is the following. please tell me what else to do

    1. charge it till it is 100%
    2. verify if bios version is 5.11 28.04.2016. If not boot to usb with official dual boot bios update
    3. log into windows and before everything disable driver update. update drivers using chuwi official rar pack.
    4. boot in android and enjoy it…

    is there something else to do?

    thanks

    #40423
    Anonymous
    Inactive
    • Posts: 24

    Yeah, I should get my Hi12 today as well.  I’m also interested. This is my checklist:

    1. Charge
    2. Stop driver updates
    3. Backup drivers
    4. Get disk partition information for future resets
    5. Update BIOS in case of issues with reboots

    Let’s see…

    #40427
    Anonymous
    Inactive
    • Posts: 24

    Arrived. I’ve started to charge it, the red LED is blinking. Will it stop blinking when fully charged?

    #40431
    alessandro
    Participant
    • Posts: 123

    thanks.

     

    how can I do point 3. and 4.??

    if you are using a proper cable, you can see red not flashing anymore iftablet is charged!

    #40433
    Anonymous
    Inactive
    • Posts: 24

    I’ll use a program called “double driver”

    #40437
    alessandro
    Participant
    • Posts: 123

    and why you do that?

    and what about updating drivers?

    thanks

    #40438
    Anonymous
    Inactive
    • Posts: 24

    Don’t update drivers. I’ll do that in case I’ll need to reinstall everything. I’ll need the drivers. Not a needed step, just to be extra careful for the future. You don’t need to do it immediately.

    #40444
    alessandro
    Participant
    • Posts: 123

    Ok, thanks.

    What serial do you have and what bios was installed?

    #40447
    Anonymous
    Inactive
    • Posts: 24

    Q64G45160403662. Haven’t looked at BIOS yet. Touchscreen is terrible, I have to push hard and try three times to make effect. Can’t properly scroll neither.

    #40450
    Anonymous
    Inactive
    • Posts: 24

    Are air gaps under glass normal? Any solution to unresponsive touch? Touch keyboard is unusable.

    #40453
    Marios
    Participant
    • Posts: 4

    Any way to find out BIOS version from withing windows so i dont have to access BIOS ?

    #40458
    alessandro
    Participant
    • Posts: 123

    Bad touching under Windows or Android?

    Somewhere here in the forum a user posted a trick to make touch better on Windows.

    About air bubbles, of course it is not normal… you have to buy a tempered glass one, and once arrived remove yourself. ..

    #40460
    Anonymous
    Inactive
    • Posts: 24

    I meant the screen glass, not the screen protector. Bad quality. Bad touch on both of them.

    #40484
    alessandro
    Participant
    • Posts: 123

    Wow. My new hi12 which has a 05 serial, has already new bios!!! Good!

    My touch screen in the middle seems better in Windows than android…

    #40524
    EROLoLICON
    Participant
    • Posts: 28

    There are two screen protectors: a thicker one (the real screen protector) and a thinner one (an screen protector protector). Look carefully.

Viewing 15 posts - 1 through 15 (of 18 total)
  • You must be logged in to reply to this topic.

Lost Password