TechTablets › Forums › Chuwi Forums › Chuwi Hi12 Forum › finally it is coming… what now?
- This topic has 18 replies, 1 voice, and was last updated 1 year, 9 months ago by
Sandra Ware.
-
AuthorPosts
-
June 10, 2016 at 10:08 am #40420
this evening I will finally have my hi12.
my plan is the following. please tell me what else to do
- charge it till it is 100%
- verify if bios version is 5.11 28.04.2016. If not boot to usb with official dual boot bios update
- log into windows and before everything disable driver update. update drivers using chuwi official rar pack.
- boot in android and enjoy it…
is there something else to do?
thanks
June 10, 2016 at 10:33 am #40423Anonymous
Inactive- Posts: 24
Yeah, I should get my Hi12 today as well. I’m also interested. This is my checklist:
- Charge
- Stop driver updates
- Backup drivers
- Get disk partition information for future resets
- Update BIOS in case of issues with reboots
Let’s see…
June 10, 2016 at 11:07 am #40427Anonymous
Inactive- Posts: 24
Arrived. I’ve started to charge it, the red LED is blinking. Will it stop blinking when fully charged?
June 10, 2016 at 11:19 am #40431thanks.
how can I do point 3. and 4.??
if you are using a proper cable, you can see red not flashing anymore iftablet is charged!
June 10, 2016 at 11:25 am #40433Anonymous
Inactive- Posts: 24
I’ll use a program called “double driver”
June 10, 2016 at 11:46 am #40437and why you do that?
and what about updating drivers?
thanks
June 10, 2016 at 11:49 am #40438Anonymous
Inactive- Posts: 24
Don’t update drivers. I’ll do that in case I’ll need to reinstall everything. I’ll need the drivers. Not a needed step, just to be extra careful for the future. You don’t need to do it immediately.
June 10, 2016 at 1:17 pm #40444Ok, thanks.
What serial do you have and what bios was installed?
June 10, 2016 at 1:53 pm #40447Anonymous
Inactive- Posts: 24
Q64G45160403662. Haven’t looked at BIOS yet. Touchscreen is terrible, I have to push hard and try three times to make effect. Can’t properly scroll neither.
June 10, 2016 at 2:30 pm #40450Anonymous
Inactive- Posts: 24
Are air gaps under glass normal? Any solution to unresponsive touch? Touch keyboard is unusable.
June 10, 2016 at 3:43 pm #40453Any way to find out BIOS version from withing windows so i dont have to access BIOS ?
June 10, 2016 at 4:17 pm #40458Bad touching under Windows or Android?
Somewhere here in the forum a user posted a trick to make touch better on Windows.
About air bubbles, of course it is not normal… you have to buy a tempered glass one, and once arrived remove yourself. ..
June 10, 2016 at 4:42 pm #40460Anonymous
Inactive- Posts: 24
I meant the screen glass, not the screen protector. Bad quality. Bad touch on both of them.
June 10, 2016 at 7:25 pm #40484Wow. My new hi12 which has a 05 serial, has already new bios!!! Good!
My touch screen in the middle seems better in Windows than android…
June 11, 2016 at 9:50 am #40524There are two screen protectors: a thicker one (the real screen protector) and a thinner one (an screen protector protector). Look carefully.
-
AuthorPosts
- You must be logged in to reply to this topic.

