I'm looking for this piece for ezbook 3 pro

I'm looking for this piece for ezbook 3 pro

TechTablets Forums Jumper Discussion EZBook series I'm looking for this piece for ezbook 3 pro

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #143657
    fobikenobi
    Participant
    • Posts: 13

    Hello! I am trying to look everywhere for this piece for the Ezbook 3 pro but I can not find it.
    My model is the old one, the one that did not come with an SSD slot.
    Do you know if there is any way to get this piece somewhere or what is the name of the cable or adapter?
    Thank you. Regards!

    #143662
    Chupa
    Participant
    • Posts: 882

    take a look here
    and then search aliexpress

    Need Help?
    1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooks

    #143665
    fobikenobi
    Participant
    • Posts: 13

    Thank you chupa, you’re a “capo”! =)

    #143678
    Gjuju
    Participant
    • Posts: 17

    Hello.

    If you just use the flat flex cable, it’s OK but, be careful if you use that particular adapter, there is no 3.3v regulator on it like the original one.

    You could fry your ssd with 5v

    #143683
    fobikenobi
    Participant
    • Posts: 13

    Uhmm, ok, thanks for the info.
    And do you know if is there an adapter with that voltage regulator?
    Thank you.

    #143692
    Chupa
    Participant
    • Posts: 882

    the picture shows an extender, not an adapter.
    I just looked at the picture since you just circled the cable I thought you were just looking to replace the cable.
    So your ezbook is a model 2 i guess?

    Need Help?
    1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooks

    #143699
    fobikenobi
    Participant
    • Posts: 13

    Hi! No, it’s the EzBook 3 Pro without a slot for SSD, bought in mid-2017.
    As you can see, it only comes with the slot for the flex cable but it came from the factory without it and without the adapter.
    What I would like to find would be that adapter if not original
    Thanks.

    http://i67.tinypic.com/v4mbgn.jpg

    #143707
    Chupa
    Participant
    • Posts: 882

    if it came without adapter are you sure your bios does support it at all?
    what bios version (date) you have?

    Need Help?
    1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooks

    #143712
    joe321
    Participant
    • Posts: 45

    I think it will work if you can find this adapter… I have v4 ezbook 3 pro and it didnt came with this adapter, so I took one fromĀ  yepo 737A and it worked…

    #143719
    fobikenobi
    Participant
    • Posts: 13

    I do not know because I have the board removed and I’m waiting to have time to reassemble it.
    As soon as I mount it, I tell you.

    #143730
    Chupa
    Participant
    • Posts: 882

    a v4 without ssd slot, first time I hear about that

    Need Help?
    1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooks

Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar