TechTablets › Forums › Cube Forums › Cube iWork10 Ultimate › Iwork10 PRO
Tagged: Iwork10 pro
- This topic has 8 replies, 1 voice, and was last updated 10 months, 2 weeks ago by
Al.
-
AuthorPosts
-
October 14, 2018 at 8:45 pm #147641
Hi,
i cant find any data regarding my new table (that i already flash with a wrong driver package and now have no touchscreen)
it is a Iwork10 pro (i can only find iwork10 ultimate\flagship)
and i tried to get the original firmware from
http://www.cube-tablet.com/download
with no success (it is in Chinese and request to install an unclear software in order to download)
can you guys help?
October 16, 2018 at 7:24 am #147659Look at your tablet’s back cover. Does it say “i1002” anywhere? If so, here’s the the most recent Windows+Android dualboot package for it: https://mega.nz/#!5xd1TYrA!6G4ypEv6Cko_EGdeux4VDoBnxIQGKFBWp8iPlLnwB80
October 16, 2018 at 3:25 pm #147666Hi, Haim, I published the full set of drivers for the iWok10 Pro last week, see this post:
Install Windows 10 version 1803 and then those drivers.
October 16, 2018 at 3:54 pm #147667Look at your tablet’s back cover. Does it say “i1002” anywhere? If so, here’s the the most recent Windows+Android dualboot package for it: https://mega.nz/#!5xd1TYrA!6G4ypEv6Cko_EGdeux4VDoBnxIQGKFBWp8iPlLnwB80
Encountered error: The archive is either in unknown format or damaged.
Tried using different PC to download however received the same error message when try to open it.
October 16, 2018 at 4:20 pm #147668thank you i mange to flash and it work grate!
i want to have and android 6 or up and i am not an expert….
i have found on guide that show how to install with lineage-13 but it for a different model and it only direct to a different site in Russian and very not understandable using google translate
can you explain to me how to make this to my table
thank you
October 16, 2018 at 8:38 pm #147669If you want to have Android and Windows, you have to flash Android first.
Since you were having problems to get the official image from http://www.cube-tablet.com, I have uploaded the file here:
https://drive.google.com/open?id=1NF2a3zB0PRbMzfYSBKdzj-EGf37QG1Bh
Copy the contents of the Android folder to a pen-drive formatted as FAT32, then boot the tablet with it. This will install the official Android image.
For “cooked” Android images, follow the instructions of the cooker. I have not done that on the iWork Pro or Ultimate, if I purchase a tablet with an x86 CPU is to use it with Windows, to run Android there are a lot of other tablets.
October 17, 2018 at 3:08 am #147674Look at your tablet’s back cover. Does it say “i1002” anywhere? If so, here’s the the most recent Windows+Android dualboot package for it: https://mega.nz/#!5xd1TYrA!6G4ypEv6Cko_EGdeux4VDoBnxIQGKFBWp8iPlLnwB80
Encountered error: The archive is either in unknown format or damaged. Tried using different PC to download however received the same error message when try to open it.
Found out that I need WinRAR version 5 and above to extract it.
August 29, 2019 at 5:58 pm #181604Hola! Se6rian tan gentiles de proporcionar el archivo BIOS de la tablet iwork 10 pro con las letras alldocube en español por favor, muchas gracias!!!
March 7, 2020 at 6:03 pm #182789I can’t update my iwork10 Pro to W10, ver. 1909. It needs additional space on C:. I did connect additional USB drive follow the messages with no result.
Extend volume of c: is grayed out. Any advice?
-
AuthorPosts
- You must be logged in to reply to this topic.