NEW WINDOWS INSTALLATION WITH ADDITIONAL LANGUAGE

[Wolf]

Hi,
I tried to reset the system and that ended in a boot loop trap.
Finally I found a solution in the forum by pressing F7 when the JUMPER logo appears while booting to change the boot location to USB stick.

I had created a new windows 10 USB stick with the media creation tool from another EZBOOK 3 Pro I have.
While doing that media creation I was only able to choose the english or united states english installation. Otherwise I got a warning when I tried to add any other languages like german. So I created the stick based on the other system with the same set of languages.

That stick worked after doing the F7 trick during boot, but:

How do I get a clean Windows 10 creators installation with English and German languages “onboard” of my USB stick?
And how do I add the latest drivers for the EZBOOK 3 Pro V4 or V3 version to that stick?

Simply download the drivers from the forum page here and install them later or is there a trick to implement these drivers on the USB stick I had created with the media creation tool?

Thanks a lot for any tipp or link how to get a smooth and clean, but local installation.

<span style=”text-decoration: underline;”>UPDATES 9.12.2017:</span>

I. How do I get a clean Windows 10 creators installation with English and German languages “onboard” of my USB stick?
SOLUTION:
just ignore the warning regarding licence key

II. And how do I add the latest drivers for the EZBOOK 3 Pro V4 or V3 version to that stick?
SOLUTION:
Chris had added the double driver dump of the new V4 in the download section here – do not use the outdated on the NEWS page

III. Simply download the drivers from the forum page here and install them later or is there a trick to implement these drivers on the USB stick I had created with the media creation tool?
SOLUTION:
press windows key, type “device manager” regardless your language preferences and start the device manager.
Now look for the first driver with a yellow warning sign.
Right click on the driver and “aktualisieren / update”
Now choose the location of your downloaded driver dump from Chris Download section and make sure that option “include subfolders” is activated.
The new and correct drivers will be found within seconds

Then you have to do all the steps again for each driver with a warning sign. Might take 5 minutes so be patient until you have updated these 8 to 12 drivers.

If windows updating is not working or you may get an Error 0x80240442 then do this

★ press windows key
★ type “services.msc” + press ENTER
★ now scroll down to “Windows Update” service
★ right click on “Windows Update”, then click on “properties”
★ inside the Windows Update properties set start type to “automatic”
★ now hit in the lower right “apply”

Now check your windows update if it is running.
If you still recognice a cumulative windows update error try the following

★ right click on windows start flagg and then choose “COMMAND LINE as Admin” or “Powershell as Admin”
★ now type or paste this command followed by ENTER “DISM.exe /Online /Cleanup-image /Restorehealth”
this might take a while – just be patient, cause this is the fastest way
★ if DISM has finished type or paste this command followed by ENTER “sfc /scannow”

Now go back to windows update and see if it is working. Might be that you have to reboot after one of the steps above so please follow all these “restarts” and do not ignore them. Then the system will work and update.

A lot of steps but you will get a complete up to date and new localized system and no longer rely on the buggy JUMPER recovery implementation were factory reset and similiar simply do not work if you clean the previous drive / installation.

Windows USB Media tool creation might take up to 2 hours, windows installation from the stick about 1 hour and 30 minutes for driver updates and updates and other changes but a new, pure system instead of all the downloads it needs to get from a Jumper factory reset installation to up to date.

Good luck - WOLF

[juan]

You can chose only one language when greate usb image. Not matter what.

For example german. Thats all.

[Wolf]

Yes, one language, but the problem was that you get a licence warning if you change the language to something else than english or chinese.
That was the first main problem but I did that whole installation stuff twice, first in english and later in german.

Therefore you can ignore the image creation tool warning regarding licence.

Good luck - WOLF

[Author]

Posts