TECLAST F7 with NEW SSD CLONED WOULD NOT BOOT FROM IT

TECLAST F7 with NEW SSD CLONED WOULD NOT BOOT FROM IT

TechTablets › Forums › Teclast Forums › Teclast Laptops › TECLAST F7 with NEW SSD CLONED WOULD NOT BOOT FROM IT

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 22, 2018 at 9:55 am #144698
    shaktoo
    Participant
    • Posts: 1

    Dear Chris,

    I have bought the F7 and bout a M.2 256GB SSD cloned it & installed it without any issues. I then chnaged in BIOS & umpteenth time boot order etc but cannot get the laptop to boot from the SSD install ??? I can see both windows on the emmc AND the SSD but just wont boot into it ?

    I followed  https://techtablets.com/forum/topic/step-by-step-clone-64gb-emmc-to-ssd-easy-fast-free-method/  to do this .

    Please help as otherwise the SSD is usless

    Cheers !

    August 5, 2018 at 10:16 am #145191
    Wortelstok
    Participant
    • Posts: 1

    I have encountered the same problem. Did you find a solution?

    August 13, 2018 at 4:16 pm #145460
    Chupa
    Participant
    • Posts: 882

    check my help below, and check the jumper section

    Need Help?
    1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooks

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar