[TUTORIAL] Install properly Windows 8.1/10 VI10

[Frédéric Gub]

WOW 4 hours LOL it was 45 for me (ADSL 1.3mo/s)!! Anyways, yes i think you should configure the bios as mine, because as i say, to resume:

-I had the G1d bios not configurated: ONLY WIFI WORKING, eveything as uknown devices

-Then G1D bios configurated: everything detected BUT sound and touch didn’t work

-I install J1D bios not configurated: Only wifi working, everything else as unknown device

-J1D bios configurated: Everything detected and everything worked

And what serial number  do you have?

[john]

Q32G22151000xxx bought one week ago.

Which one is yours?

Where did you find these images?

Acctually i am updating W10 with the official tool of windows from W8.1. Then I will check the drivers you posted

Frédéric Gub wrote:

A little compilation of the specif drivers for windows 8.1/10: https://mega.nz/#!ackBGaiQ!r6RK3p9Wu5TSYdRYop537r8ADuGzw3XFaIpYeU82YuE The pack contains: -MYi2c touch drivers -Broadcom WIFI/Bluettoth drivers -Intel WDM wierd drivers

With the configuration of the BIOS that you have just posted. That should be the same as installer a clear image.

If everything work I will install your image.

[Frédéric Gub]

I have same serial number as yours. So what you are planning to do is installing windows 10 from your windows 8.1? So i suppose that it was the original Windows 8.1 with every drivers already installed?

Anyways we will see, if you have problems we will find the solution. But you guys really don’t want to contact me otherways??!

[Brian]

Thank you Frédéric for sharing the old BIOS file, it REALLY saved me! I totally screwed myself loading the “newer” BIOS from the download section on my 221510XXXXX and couldn’t get the touch or sound to work no matter what driver I used, I tried re-flashing with the older BIOS archived in the download section and that didn’t help, I’m assuming because it was never meant for the 221510 serials. But thankfully I found your post and re-flashed with the old BIOS you posted and now all is back to normal!

The whole reason I flashed the BIOS in the first place was to fix my USB ports (the tablet’s USB ports were somehow disabled from the factory when I received my unit and I read that re-flashing the BIOS should fix that). Well the re-flash fixed my USB but broke my touchscreen and sound, so anyone with a 221510XXX that has dead USB ports, use the instructions provided here: http://techtablets.com/forum/topic/disabled-usb-ports-how-enable-again/ to re-flash the BIOS without access to the USB ports, but be sure to use the BIOS Frederic provides at the top of this page.

I’m staying on 8.1 for now since everything is working. I hope they archive this 221510XXX BIOS in the downloads section here for others with the same serial, because currently the two Vi10 BIOS files there now will just cause trouble for people on the 221510XXX serials 🙂

Cheers!

 

[Frédéric Gub]

Hey Brian, i am really happy that your VI10 works again! Thanks for your verry sympathic feedback. For eveyone, as you can see the BIOS is the source of most hardware issues on Vi10 221510 version. And by the way you really should stay on 8.1 for now at least because in windows 10, there is no hardware issues but from time to time there is big freezes and blue screen error messages. So 8.1 is more stable. And an other thing, you have the original 8.1 installation?

[john]

My (no)progress is:

1 I uploaded W10 from W8.1 that the Chuwi brings. With the official tool of Windows. At this point everything works…usb wifi touch…

2 Put the settings of the BIOS like Frederic said.

3 Install the drivers called Genesis pack,

Result: Touch doesnt work… wifi usb ok.

 

Next step. Install W10 from Frederic`s images and see what happen. MyBIOS is J1D so its the good one.

[Frédéric Gub]

Yes John i think it might be the best idea, because i can’t really help you with something i don’t know… But if you could tell us what’s going on on device manager it could be helpul. Anyways, with the images i provide i can  assure you at least that it work

[john]

Device manager now

http://imgur.com/PCRJdxS

[Frédéric Gub]

DOOON’T WORRY it is normall!!

[Frédéric Gub]

Now in order for you to have the touchscreen working:

1.Install dpinst32.exe (you already did it i guess),then reboot

2.Put icnfirmware.sys and MYI2C.sys on c:/Windows/system32/drivers and reboot

3.Normally it is okay. If it is not, go on device manager,select myi2c, update, search on computer,choose from pilots on my computer, then disc, browse and select the myi2c.sys and let it install and reboot

[Frédéric Gub]

otherwise, sound is working?

[john]

Frederic, you are a fucking master!!

It works perfect! I think the key was copy icnfirmware.sys and MYI2C.sys on c:/Windows/system32/drivers and reboot

 

[john]

Frederic, you are a fucking master!!

It works perfect! I think the key was copy icnfirmware.sys and MYI2C.sys on c:/Windows/system32/drivers and reboot

Now i am going to install your W10 image.

 

P.D. i have try to reach you by skype but its better for future users to read the topic and find the solution.

[Woody]

i installed clean 8.1 and installed driver pack “ulitmate pack genesis” No wifi , no sound, touch, graphics and tablet cant see my sd card ( samsung 32 gb EVO Class 10) Please help, i deleted android and have windows only. Have Bios J1d_s165c_2006 and  “uefi os fast boot disabled” Can u tell me wtf ??

Can u upload working drivers ??

 

 

 

 

[Woody]

why f… chuwi not share working drivers ?? :/

[Author]

Posts