X2Pro

[Alex AKA B2]

I ordered the whole set: X2 tablet, Pen, and keyboard from Gearbest using PayPal (at least I can use that for leverage to refund if necessary). I am hoping to have them before the new year… Perhaps I am being too optimistic.

 

 

 

[Alex AKA B2]

I am getting prepared to do the clean installation when my X2 arrives…

Are you preparing your USB media with FAT32 for use with a UEFI Windows 10 installation or are you preparing the USB Media as NTFS for use with a BIOS/CSM installation? I am imagining that with the BIOS used on the X2, that UEFI is the correct method.

 

Also For what Its worth, I do intend in doing a very nice pictorial of a heatsink mod using copper shims and high thermal conductivity heatsink pads (Pads that are at least 5W/mK thermal conductivity).

 

Have a great weekend all!

[Daniel]

Alex AKA B2 wrote:

I am getting prepared to do the clean installation when my X2 arrives… Are you preparing your USB media with FAT32 for use with a UEFI Windows 10 installation or are you preparing the USB Media as NTFS for use with a BIOS/CSM installation? I am imagining that with the BIOS used on the X2, that UEFI is the correct method. Also For what Its worth, I do intend in doing a very nice pictorial of a heatsink mod using copper shims and high thermal conductivity heatsink pads (Pads that are at least 5W/mK thermal conductivity). Have a great weekend all!

 

looking forward to see the pics!

[Shaun Collins]

Hey guys

 

Can i confirm this will run 64bit windows no worries?

No bios incompatibility?

[Daniel]

Shaun Collins wrote:

Hey guys Can i confirm this will run 64bit windows no worries? No bios incompatibility?

 

 

For me, it works great, no problem at all

[Tim]

Managed to get my stylus to work. did a calibration and its done..

[Tim]

Shaun Collins wrote:

Hey guys Can i confirm this will run 64bit windows no worries? No bios incompatibility?

Hey Daniel, i did an install on 64bit win10 enterprise. running well too.

[Anthony]

Prepared with USB media with FAT32 for use with a UEFI Windows 10 installation

[Alex AKA B2]

Greetings everyone. Just a heads up for those looking for a source with IMMEDIATE shipping (they have the keyboards and stylus IN HAND ready to ship) I found an AliExpress seller that has sent me images of then items with a timestamp photo for proof. They immediately responded to my email and I have cancelled my keyboard/stylus order from GearBest and have ordered the keyboard from this vendor:

Link to vendor on AliExpress for X2 Pro Keyboard

[Shaun Collins]

thankyou so much for reply about 64bit,

 

 

a question for owners of core m, if you previously owned quad core atom..

performance wise?

multitab browsing, windows in general.. whats performance like worth upgrading, or better to wait a 6mths-year or so and hope core m improves

[ren]

Greetings to everyone. I modified cooling system of the tablet and achieved 67 degrees max under stress tests load and 3d mark 06 score of 6350. So no throtling just tdp limit. I described the process here:
http://4pda.ru/forum/index.php?showtopic=697581&st=140#entry45096304
Sorry, the link is in russian and it is the second part.
The first part is above, 2-3 pages earlier.

[Daniel]

Oh my, you dont think you can upload them here with some english comments? It would be really interesting to hear what you have to say about the pics

[Anthony]

Hi – I have the Pipo W3F (Z3735F cpu).

I think there is a significant difference – even though Win10 is optimised for low-power CPUs (like the Z3735F), you can still notice the difference. It also helps that there is 4gb ram instead of 2gb ram.

I’d check out the “Teclast X16 Power” – has the latest “low power” Cherry Trail CPU and 8GB ram – although at the similar pricepoint its at, might be worthwhile to just go the X2 Pro or other Core-m based tablets.

 

[Riccardo Majewski]

Hi everybody!

I’ve ordered a Teclast X2 pro + keyboard + stylus + 64GB microSD C10 samsung for 405$ at gearbest on 27 november.

Still my tracking number in the DHL website says they are not started moving.

1- Is it normal? How much time I should expect for delivery?

2- Then, what is the internal SSD format?

Would you advice to open the tablet, change the memory and do some of the heat paste change done/suggested above?

(I’ve opened a lot of laptop PCs, to change broken parts, clean and replace thermal paste, ecc…I have some experience….. it’s similar with this tablet?)

3- There is actually somewhere an android ROM for this tablet? (To do a proper dual boot and not just virtual.)

4- Is the stylus good? I can’t wait to see it working… there are some detailed videos of the stylus at work?

 

Thank you guys already for any answer!

This thread is life-saving!

[ren]

In short – I used 0.4mm copper plate between CPU crystal and copper CPU socket with Colaboratory Liquid Metal pro thermo interface applied to contact crystal-copper plate and plate-socket. I covered CPU contact pins with anti conductive lacquer to prevent surprises from liquid metal. Than, I removed aluminium sticker from tablet cover and connected all silver conductive stickers in therms of electronic conductivity. I used thermo adhesive artctic silver to stick copper plate 0.2mm on tablet cover and than two copper plates 0.4 and 1mm on top of it to provide contact socket-tablet cover(arctic mx4 is between socket and cover).And I placed copper plate 0.4mm in the pit on CPU socket too.Nothing very hard but still a lot of work.

[Author]

Posts